Jump to content
Ford Transit Connect Forum
   

G B L

T.C. Member
  • Posts

    2,507
  • Joined

  • Last visited

  • Days Won

    114

Everything posted by G B L

  1. Nice but we do not have a choice here so we can"t even be angry. If you want the TC here that's what it is.
  2. Nice, Still no Barn doors huh.
  3. Have you used forscan or a good scan tool yet?
  4. Here's a thought put some hot glue in the missing nozzle hole and get the number drill that matches the size and drill a hole, see if you win!
  5. You can easily test the light once it is removed. Mine sets a wrong bulb code once and a while but that is incorrect and I Muck with the wires and it is ok for a good while.
  6. Good Idea on the Drain plug. Put it on the side to keep it out of the way. I have had good results with this fluid.
  7. I think that is a reach, but fact that there is an intermediate shaft and extra bearing could make you correct. That is a reach on my part!
  8. Good Report can"t wait for pictures! No Diesels here .
  9. The case has been exposed to extreme prejudice and if you are in it for the long haul and you are doing the Engine any way do the whole thing! What year?
  10. It should not be too hard just be careful when you drill. (the voice of experience)
  11. That is part of the differential the side gears. The trans is done.
  12. That is very good. The wiring diagram posted earlier for the does not show any wiring for electric brakes so if you want brakes on the trailer you will still need a controller and the brake wiring.
  13. Nice, you have more self control than I do. I find that it is very hard to match the inflow to the outflow . The enclosed trailer is great because eliminates having to unload the Item because of weather.
  14. Here's a thought is there enough room on the other side of the bulkhead between the seats to mount the winch? If so it would pull the whole way and be completely out of the way. In my van the space between the seat is used to hold all the stuff that falls there any way.
  15. Well that will be a Good test for the TC . You will need to be careful. It will be very easy to over stuff.
  16. Or you could have 2 vans , 2 pickups and several trailers if you can't make up your mind.
  17. I have used the Herculiner product and it works well, It can be very messy so pay attention.
  18. I think it is no issue Have you pushed the door lock button with it running on remote start? Does that change anything.
  19. What Year? Does the nob on the Dash connect directly to the cable that operates the flap or is there a servo motor? If you find out which way the nob has to be turned to extend the cable then unclip the 2 wings that hold the cable jacket and see if you get more extension.
  20. It has to be a temp signal issue one of the temp sensors is not reporting from the beginning and warms up . The ECM is locking out the boost . The data need to be recorded from warm up right threw the shut off and restart. It will be there .
  21. Any running issues, power, Fuel consumption. Scan tool or Forscan with live data ? Did you check the exhaust pressure?
×
×
  • Create New...