davidparker Posted November 5, 2019 Share Posted November 5, 2019 I am trying to decide which version of the Curt hitch to get and I thought I would get some input from those that have one. The class 3 has the 2" receiver which I like for a couple of reasons. One reason is that I have a couple of 2" hitches. The second reason is most bike racks, etc are 2". However, the class 2 looks like there is more room for spare tire removal, appears to have more ground clearance and doesn't stick out from the bumper as much. Obviously, I wont need more towing capacity than the class 2, since its more than the TC capacity, FYI, I'm planning on towing a small light trailer (<800 lbs). So here are my questions for those that have a Curt hitch. Does your class 3 scrape on driveways, etc? Is the tire clearance an issue? Have you hit it with your shins? Quote Link to comment Share on other sites More sharing options...
jrm223 Posted November 5, 2019 Share Posted November 5, 2019 I have the Curt class 3 hitch. I keep a hitch ball in mine and it's never scraped on any driveways that I've noticed - even though the front bumper will scrape some of the driveways, the hitch doesn't. I haven't dropped the spare tire, so I couldn't say if it would cause an issue, but I can say that my spare tire still has clearance all around. Even with the hitch ball in, I haven't hit my shins on anything, but I've also had lots of trucks in my past, so I'm maybe more accustomed to it (knee knockers on about half of the trucks I've had and I'm 6ft tall). Even for light use, I don't think I'd bother with a class 2 and it's itty-bitty 1.25" receiver. davidparker 1 Quote Link to comment Share on other sites More sharing options...
Fifty150 Posted November 5, 2019 Share Posted November 5, 2019 Go with the class 3. You don't want a class 2, only to have to buy all new accessories, since you already have what you need for a 2" receiver. Humphrey's Van, rpk3mp and davidparker 3 Quote Link to comment Share on other sites More sharing options...
i86hotdogs Posted November 5, 2019 Share Posted November 5, 2019 I'd agree with Fifty here. I am fairly positive that 800lb trailer will have a 2" hitch attachment. Most things you attach to your hitch will have a 2" end. Not sure if you have a 1st or 2nd gen TC, but the 2nd gen TC's have pretty good rear clearance. davidparker 1 Quote Link to comment Share on other sites More sharing options...
davidparker Posted November 5, 2019 Author Share Posted November 5, 2019 It is a 2018, Gen 2 Cargo. thanks for the feedback! I am leaning towards the Class 3. Just want to check with the members first, to make sure I know if there are any issues. jrm223 and i86hotdogs 1 1 Quote Link to comment Share on other sites More sharing options...
G B L Posted November 9, 2019 Share Posted November 9, 2019 Go with the 2" receiver that make all the hitches useful with other vehicles . davidparker 1 Quote Link to comment Share on other sites More sharing options...
Don Ridley Posted November 9, 2019 Share Posted November 9, 2019 2" is more versatile. A simple insert converts to 1.25". jrm223 and davidparker 2 Quote Link to comment Share on other sites More sharing options...
Beta Don Posted November 9, 2019 Share Posted November 9, 2019 I bought the class 2 mainly because I've had them on other small cars and I already had an assortment of hitch receivers to fit it . . . . and, because in more than 20 years, I've never had any accessory (bike racks etc) which require a 2 inch receiver. Also, the smaller hitch adapter is easy to stow away - I wrap mine in an old tee shirt and stow it in the rear drivers side compartment But . . . . it's true that the 2 inch receiver *is* more versatile, *if* you have need of accessories which will only fit a 2 inch - Not a consideration in my case Don davidparker 1 Quote Link to comment Share on other sites More sharing options...
davidparker Posted November 9, 2019 Author Share Posted November 9, 2019 Thanks @Beta Don, I had not considered stowing of the receiver... or the weight. From the pictures it looks like the class 2 is about a 1/2" recessed from the bumper edge. Is that the case? Also, how much drop/rise do you have on your hitch? Thanks! Quote Link to comment Share on other sites More sharing options...
Beta Don Posted November 10, 2019 Share Posted November 10, 2019 It's about flush with the back of the bumper, but it's tucked up very tight with the bottom lip of it If you have a need for the 2" receiver, by all means go that way - It is more versatile, though they do make bike racks for the 1 1/4 receivers too - My daughter has one on her car and she never pulls a trailer. Otherwise, I actually prefer the smaller Class 2 for 4 cylinder cars which will never tow anything heavy where you don't need the extra tongue weight rating Don davidparker 1 Quote Link to comment Share on other sites More sharing options...
G B L Posted November 10, 2019 Share Posted November 10, 2019 The curt hitch is flush with the bumper and has a 1 inch drop. The ball mount I use has a bout a 4 inch rise to allow the trailer frame to be level. davidparker 1 Quote Link to comment Share on other sites More sharing options...
davidparker Posted November 10, 2019 Author Share Posted November 10, 2019 Thanks @Beta Don & @G B L. The info and pics are very helpful! Quote Link to comment Share on other sites More sharing options...
MLB Posted August 12, 2020 Share Posted August 12, 2020 i went with the class 2 for 1 reason. Weight. My 2" insert/ball weighs a lot more than the 1'1/4" setup, and so does the bigger framework of the class 3 versus 2. Why hang 20lb (guessing) extra lbs off the back of a light duty vehicle when you can never use the extra hd factor? Maybe the extras if you'll really use them. i86hotdogs 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.