Slamsit Posted July 3, 2019 Share Posted July 3, 2019 Long time lurker. First time poster. Just a teaser shot here, but it’s very custom. The build is starting to come along, and have paint in the lineup beginning of August. A ton of work already went into it. I’ll try and grab some additional pictures tomorrow. Will look good with a satin while pearl paint. Pic for attention: GTVan50, Bill Jackson, 916Janitorial and 1 other 1 3 Quote Link to comment Share on other sites More sharing options...
Slamsit Posted July 3, 2019 Author Share Posted July 3, 2019 Another shot: Don Ridley and PartialRug13 1 1 Quote Link to comment Share on other sites More sharing options...
mrtn Posted July 3, 2019 Share Posted July 3, 2019 nice (y) Quote Link to comment Share on other sites More sharing options...
Slamsit Posted July 3, 2019 Author Share Posted July 3, 2019 (edited) You can see the custom M3 skirts here pretty well. The lip dig up some gravel due to the drop. Still have some work to do some filler to some sections, along with a few canards. The front lip is from a 2001-2001 Jetta GLI Edited July 3, 2019 by Slamsit GTVan50 1 Quote Link to comment Share on other sites More sharing options...
Fifty150 Posted July 3, 2019 Share Posted July 3, 2019 Those headlights are so clean! Slamsit 1 Quote Link to comment Share on other sites More sharing options...
G B L Posted July 4, 2019 Share Posted July 4, 2019 Looks like a great project, but would not work on my road! Quote Link to comment Share on other sites More sharing options...
Slamsit Posted July 4, 2019 Author Share Posted July 4, 2019 I’ve gone through a few sets of wheels due to this ??♂️ 30 minutes ago, G B L said: Looks like a great project, but would not work on my road! Quote Link to comment Share on other sites More sharing options...
Double Nickels Posted July 4, 2019 Share Posted July 4, 2019 It looks like the car is lowered for aesthetics, and will encounter driveability challenges. Quote Link to comment Share on other sites More sharing options...
Slamsit Posted July 4, 2019 Author Share Posted July 4, 2019 23 hours ago, Fifty150 said: Those headlights are so clean! Thank you. I have a retrofit planned coming up with bixenon projectors going in and having the light trim painted the same as the van. Quote Link to comment Share on other sites More sharing options...
Deryk the Gypsy Posted July 11, 2019 Share Posted July 11, 2019 Looks Nice, but I would rather raise mine if could be done safe and affordably lol herb 1 Quote Link to comment Share on other sites More sharing options...
Fifty150 Posted July 11, 2019 Share Posted July 11, 2019 It has been discussed. You can look for spacers. Wheelchair transport companies lift minivans all the time. Quote Link to comment Share on other sites More sharing options...
Slamsit Posted July 12, 2019 Author Share Posted July 12, 2019 I own an aftermarket Jeep company. Have patents on the lifts. All I do is lift Jeeps daily. Wanted to go back to the tuner days of being young and having a slammed work van was just the right move in my book. Yeah, drivability is more limited, however, recently added the Airlift rear helped bag system with an onboard compressor, and I still have a functional load carrying van. jrm223 1 Quote Link to comment Share on other sites More sharing options...
herb Posted July 13, 2019 Share Posted July 13, 2019 I wonder if the black colored roof has an effect on the temp inside the van . Quote Link to comment Share on other sites More sharing options...
mrtn Posted July 13, 2019 Share Posted July 13, 2019 Yes, it's just physics. Quote Link to comment Share on other sites More sharing options...
Bill Jackson Posted July 21, 2019 Share Posted July 21, 2019 Great work. I have a 2012 the slam changes the look of the van entirely. I like that you have air suspension so that you can still carry a load when you need to. Thanks for showing this one off. I look forward to more pics when the new paint is on. Quote Link to comment Share on other sites More sharing options...
Slamsit Posted July 22, 2019 Author Share Posted July 22, 2019 Paint is going on this weekend on Saturday. As for the roof, I haven’t noticed any drastic temp changes as the air is still ice cold from the AC. I did get a chance to clean her up a bit this past weekend. Here are some more pictures. If you would like to follow follow my IG handle, it’s @MFCOFFROAD . There’s more Jeep content on there as that’s my business, but sometimes post for the Slamsit. Also to note, was driving on the interstate this weekend, and it was incredible to see the amount of picture takers, high fivers and people admiring it. To be honest, you never see a slammed work van. You will see in the pics how the front lip needs a filler in the corner. Found a canard that will close this gap perfectly. davidparker and GTVan50 1 1 Quote Link to comment Share on other sites More sharing options...
Fifty150 Posted July 23, 2019 Share Posted July 23, 2019 For most of the cars out there, modifications are for aesthetics. As you know, from lifting Jeeps, half the lift kits on the market are for looks. Unless someone is willing to spend more on a performance suspension lift - people do body lifts and spacer lifts on trucks because they like the look of a lifted truck with big tires...... Never mind that the body lifts & spacers cause excessive stress on OEM suspensions and steering components, the trucks handle worse than OEM, are bad for the transmission, and the speedometers are off calibration. Most of those are simply bling for mall cruising. But that's the whole point. People want their cars to look a certain way. Be different. Stand out. Your van looks good! There's a thread about me driving a "bro truck". But as it turns out, my pickup isn't lifted high enough, or I don't have bling bling rims......my truck is not a "bro truck". I'm waiting for someone to build what we can call a "bro van". You've already lowered your van. Let's see if we can get someone to lift the van, add big wheels, and do whatever else to make it a "bro van". Slamsit 1 Quote Link to comment Share on other sites More sharing options...
Slamsit Posted August 13, 2019 Author Share Posted August 13, 2019 Had some time last night to pull the door cards and install the UK/Euro spec side view mirrors. Plug and play. Very sleek. Also had time to install the Mondeo tail lamps. That was not plug and play. I had to make a custom wire harness for them. However, they are really wicked. Quote Link to comment Share on other sites More sharing options...
mrtn Posted August 13, 2019 Share Posted August 13, 2019 The lamps are Euro TC 2010-2013 tail lamps. Not Mondeo/Fusion. Quote Link to comment Share on other sites More sharing options...
Slamsit Posted August 13, 2019 Author Share Posted August 13, 2019 I had no idea why I thought the Mondeo was a UK early model Transit Connect. My mistake Quote Link to comment Share on other sites More sharing options...
mrtn Posted August 13, 2019 Share Posted August 13, 2019 (edited) That’s a first ? Did you get the clusters without the sockets? The old and new are not compatible. Edited August 13, 2019 by mrtn Quote Link to comment Share on other sites More sharing options...
Double Nickels Posted August 13, 2019 Share Posted August 13, 2019 Mirrors look good. Quote Link to comment Share on other sites More sharing options...
Slamsit Posted August 14, 2019 Author Share Posted August 14, 2019 7 hours ago, mrtn said: That’s a first ? Did you get the clusters without the sockets? The old and new are not compatible. Do you mean did I get the tail lamps with the sockets? If so, yes. I figured out what each of the pins corresponded to for the euro tails, and custom wired to the pins. At the other end of the wire harness, I did spade terminals. On the US Transit wire harness, I simply cut every wire, and crimped spade terminals on all of them. Then connected them to the corresponding harness I made for the Euro tails. There is only one shared ground for all of the connections back there as well from the factory. Quote Link to comment Share on other sites More sharing options...
Slamsit Posted August 14, 2019 Author Share Posted August 14, 2019 5 hours ago, Double Nickels said: Mirrors look good. Thank you. Very use full. However, the driver side is obviously made for a right hand drive TC. its hard to see out of unless I lean forward. I figured out I can push the housing out, but it will want to click back into it's resting position. I figured I can 3D print a nick stop to hold it in the position necessary for seeing safely out of it. Quote Link to comment Share on other sites More sharing options...
jrm223 Posted August 14, 2019 Share Posted August 14, 2019 13 hours ago, Slamsit said: Thank you. Very use full. However, the driver side is obviously made for a right hand drive TC. its hard to see out of unless I lean forward. I figured out I can push the housing out, but it will want to click back into it's resting position. I figured I can 3D print a nick stop to hold it in the position necessary for seeing safely out of it. They should both be RHD format if ordered from the same country. That's why I ordered my large gen 2 mirrors from US junkyards, so they'd be LHD and wouldn't have weird problems like that, lol. Are the large gen 1 mirrors not available in the US already for LHD? I've never paid much attention to G1 mirrors to see if any have the large mirrors available here, but it definitely is an option on gen 2. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.