buckethead Posted April 26, 2016 Share Posted April 26, 2016 Today I pulled out all the interior pieces in the cargo area of my 2015 Transit Connect cargo van including the floor extension. It was surprisingly easy. There is a lot of room under there. It has me rethinking some things. gargman, Booner, chong and 2 others 5 Quote Link to comment Share on other sites More sharing options...
DapperVan Posted April 26, 2016 Share Posted April 26, 2016 SUBWOOFERS! Ha just kidding. jrm223 1 Quote Link to comment Share on other sites More sharing options...
mrtn Posted April 27, 2016 Share Posted April 27, 2016 SUBWOOFERS! Not kidding. What else? DapperVan 1 Quote Link to comment Share on other sites More sharing options...
buckethead Posted April 27, 2016 Author Share Posted April 27, 2016 House batteries. jrm223 and chong 2 Quote Link to comment Share on other sites More sharing options...
Booner Posted April 27, 2016 Share Posted April 27, 2016 What you did buckethead has me rethinking how I'd modify my TC into a mini camper, (i prefer to call it a multipurpose vehicle-- MPV) What's the dimensions of the area that you opened up? Could two regular car batteries fit in there? It would be nice to move my house batteries there, even if I had to mount one on each side of that hump-if there's enough room Quote Link to comment Share on other sites More sharing options...
buckethead Posted April 28, 2016 Author Share Posted April 28, 2016 Roughly 29 cent under any flush floor you would build. T0ASTERvan 1 Quote Link to comment Share on other sites More sharing options...
buckethead Posted July 26, 2016 Author Share Posted July 26, 2016 I got the basic floor and bunk in place. I decided to go with Formica over the plywood. Booner 1 Quote Link to comment Share on other sites More sharing options...
buckethead Posted July 26, 2016 Author Share Posted July 26, 2016 Well the site is not letting me add any more pictures. Quote Link to comment Share on other sites More sharing options...
buckethead Posted July 26, 2016 Author Share Posted July 26, 2016 Quote Link to comment Share on other sites More sharing options...
gargman Posted August 15, 2016 Share Posted August 15, 2016 So how does the plastic step come out? Haven't looked at mine yet but definately want that space. T0ASTERvan 1 Quote Link to comment Share on other sites More sharing options...
gargman Posted August 16, 2016 Share Posted August 16, 2016 Thanks Toastervan. I have checked out the progress, lots or possibilities. I pulled back the rubber matt and can see the torx bolts and how much space is there and like everyone else, I want that space! There is a metal fabrication shop close by so when I remove all this framework I will take it to them and see about making some aluminum boxes. Something that will finish flat with the deck to serve as the floor when closed. I didn't see anywhere how to remove that plastic step, just been lazy, but I will figure it out. You guys have made great progress and have some nice ideas. I really like the Idea of making the plastic step part of a concealed pull-out drawer. I will share what the metal shop has to say. T0ASTERvan 1 Quote Link to comment Share on other sites More sharing options...
gargman Posted August 16, 2016 Share Posted August 16, 2016 Will do. It's Byers Precision Fabricators in Hendersonville. The Ford mechanic recommended them. One of the engineers suggested taking the time to shape a foamboard mold of the opening for a 3D template. Not so sure about that Idea but once I get this floor area exposed I'm just going there and let them do what it takes, expense considered...but not priority. And BTW, how hard would it have been for Ford to have just made a drop down panel for us in the beginning? Oh well, guess they were too busy deciding on which "sticky stuff" to put on our floor matt! Lol T0ASTERvan 1 Quote Link to comment Share on other sites More sharing options...
gargman Posted August 16, 2016 Share Posted August 16, 2016 Thats a perfect solution, why Toyota and not Ford? If I thought that anyone at Ford would care I would send that pic to them and ask why couldn't you make a 15 dollar plastic box for us too! Thats exactly what I need only maybe a metal lid? Nice find Toaster and that is what I'm going for with the aluminum box. I'm with you on just removing the hardware and just find a box. Looked in Lowes, Home Depot and found boxes real close but no keepers. Went to camping world, nothing. Checked West Marine online and Grainger supply with a couple possibilities but nothing just right. Would love to find a "drop in" solution. Will entertain the "hinged lid" to cover the entire opening Idea first before going to the design and fabrication. Quote Link to comment Share on other sites More sharing options...
windguy Posted September 11, 2016 Share Posted September 11, 2016 @buckethead - thanks for posting pics of your mods. Are you using the open area behind the seats for storage? It appears like you have that covered up in your last pic. any new mods to share since July? Quote Link to comment Share on other sites More sharing options...
jrm223 Posted September 20, 2016 Share Posted September 20, 2016 On 8/16/2016 at 8:29 AM, gargman said: Thats a perfect solution, why Toyota and not Ford? If I thought that anyone at Ford would care I would send that pic to them and ask why couldn't you make a 15 dollar plastic box for us too! Thats exactly what I need only maybe a metal lid? Nice find Toaster and that is what I'm going for with the aluminum box. I'm with you on just removing the hardware and just find a box. Looked in Lowes, Home Depot and found boxes real close but no keepers. Went to camping world, nothing. Checked West Marine online and Grainger supply with a couple possibilities but nothing just right. Would love to find a "drop in" solution. Will entertain the "hinged lid" to cover the entire opening Idea first before going to the design and fabrication. In regards to the wasted space behind the seats, my van has vinyl flooring and I gained another 4-5" of space by removing the vinyl floor in that well, just FYI. Since there aren't any drop-in storage options, I'm thinking about trying to find a cheap aluminum diamond-plate tool chest that's 48-49" wide (see pic below), then cut the bottom out to fit the contour of the TC floor (thus why I want a cheap used one instead of brand new expensive one!) If I do this, I plan to have the chest raise above the original floor level, so the opening handle won't be a problem for me. But, people wanting to keep a flat floor would probably have to do too much work to make this solution viable for them... As for the questions about the plastic steps, they have like those "Christmas-tree" type fasteners holding them in, I just used a small crowbar to pop each one out since I don't have the specialized plastic panel removal tools. It's pretty easy to pop the steps out though, I used the crowbar to get the right leverage so I wouldn't break anything by just yanking them out with my hands... It took a couple minutes to do because I was taking my time & being careful. Quote Link to comment Share on other sites More sharing options...
buckethead Posted November 4, 2016 Author Share Posted November 4, 2016 On 9/10/2016 at 6:34 PM, windguy said: @buckethead - thanks for posting pics of your mods. Are you using the open area behind the seats for storage? It appears like you have that covered up in your last pic. any new mods to share since July? Just some junk under there now but I'm planning on batteries on the passenger side. The space is accsesable from the drivers side slider, or if the passenger slider door skid plate is removed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.