Leaderboard

@Slekjr - I started a thread discussing the cargo mat and branched into what is under the mat. see the link. http://fordtransitconnectforum.com/topic/3154-cargo-mat-for-van-models/ I had the idea of capturing the area where the platform is to use for storage. In my exploration (see pics), my assessment is that you would have to remove the black side panels in the back and the step molding in order to remove the cargo mat and then expose the platform. Not sure how the platform is bolted down to the floor. There is carpeting all the way back to the step up. I verified that by peering through some holes. I decided to hold off on going any further with this but would love to have someone else do so to answer all the unknowns. The step molding is supported by the platform so if it's removed not sure how you would modify that. Perhaps the wagon model uses different step molding. I would check a wagon version at a dealer as part of your exploration. Take pics and make measurements to better understand the differences and how to convert yours. If you decide to do this, please take notes and pics along the way to share with us. Good luck!

did some exploration of the rear door panels. I removed all four panels. took a pic of the fastener. removing them is exactly as Mustang said. very easy to remove and put back as far as plastic fasteners go. three of the four panels had a protective plastic cover on it held by adhesive. interesting that one didn't. see attached pics. the only viable opening that you can make a pocket out of is the driver's side upper one. not sure if it's better to create some type of pocket or attach something externally, which was my wife's suggestion. in terms of finishing these 1/8" masonite panels, which I think is a requirement, I'm more in favor of spray painting them either black or silver. wonder why Ford didn't make these panels out of black plastic to match the black side panels. using masonite is pretty cheesy. .