Hal Posted May 25, 2010 Share Posted May 25, 2010 (edited) Finally got my Rear Door Storage Pockets and got them installed. They were purchased from Trevor Porter <trevor@fordpartsuk.com>. The part numbers you will need are: RH Door Pocket 1526163 LH Door Pocket 1526958 Fasteners (20 req) 6678518 Parts prices are very reasonable but shipping will be more than the cost of the parts. Now for the obligatory "BEFORE" photo One of the panels you will be removing. They are held in by the round plastic push -in fasteners. The new inserts you will be installing Tools to remove the old panels - a stiff putty knife and an auto motive fastener remover. The auto trim remover isn't absolutely necessary but since I had it I used it. It did allow me to get the fasteners out without damaging them so they could be reused. With the stock panel removed With the new pocket installed. And the obligatory "AFTER" picture The whole job including rounding up the tools, etc and taking the pictures in addition to installing the storage pockets took me 1/2 hour (figure 15 min. with out the pics). Edited June 7, 2010 by Hal Quote Link to comment Share on other sites More sharing options...
Flying Media Posted May 25, 2010 Share Posted May 25, 2010 Finally got my Rear Door Storage Pockets and got them installed. They were purchased from Trevor Porter <trevor@fordpartsuk>. The part numbers you will need are: RH Door Pocket 1526163 LH Door Pocket 1526958 Fasteners (20 req) 6678518 Parts prices are very reasonable but shipping will be more than the cost of the parts. Now for the obligatory "BEFORE" photo One of the panels you will be removing. They are held in by the round plastic push -in fasteners. The new inserts you will be installing Tools to remove the old panels - a stiff putty knife and an auto motive fastener remover. The auto trim remover isn't absolutely necessary but since I had it I used it. It did allow me to get the fasteners out without damaging them so they could be reused. With the stock panel removed With the new pocket installed. And the obligatory "AFTER" picture The whole job including rounding up the tools, etc and taking the pictures in addition to installing the storage pockets took me 1/2 hour (figure 15 min. with out the pics). super nice did you run the part numbers by any us dealers??? those are to be standard on the 2011 Quote Link to comment Share on other sites More sharing options...
Flying Media Posted May 25, 2010 Share Posted May 25, 2010 (edited) no joy with those part numbers in the usa have to wait for the 2011 Edited May 25, 2010 by Flying Media Quote Link to comment Share on other sites More sharing options...
Hal Posted May 25, 2010 Author Share Posted May 25, 2010 I had already tried to order them hre in the USA. Both with the local Ford Dealer and also one that the Focus guys all over the US use. Local dealer had no idea, other guy could find them but his system would not allow him to order them. If I read the 2011 order guide correctly they will be part of the top of the line wagon package only. Quote Link to comment Share on other sites More sharing options...
ncernitz Posted June 4, 2010 Share Posted June 4, 2010 Gotta have them! What was the ball park price and what is Trevors complete e-mail address? Thanks, Neil Quote Link to comment Share on other sites More sharing options...
Hal Posted June 7, 2010 Author Share Posted June 7, 2010 (edited) Gotta have them! What was the ball park price and what is Trevors complete e-mail address? Thanks, Neil Sorry about that, I have edited my first post to get the correct address which is: Trevor Porter <trevor@fordpartsuk.com> The price was 107GBP with 66GBP of it being the insured trackable shipping method they use. Becasue of the currency fluctuations your price might be slightly different. Also, if you are careful removing the fasteners you can reuse them and not have to get new ones. I reused mine but I wanted some extras to have on hand for other projects. Edited June 7, 2010 by Hal Quote Link to comment Share on other sites More sharing options...
isellford Posted June 8, 2010 Share Posted June 8, 2010 I have my Parts Guy working on this as well. He found them in th system but is unable to order right now. He is going to periodically check asn as soon as they become available he will order me a set. I will keep everyone posted. Quote Link to comment Share on other sites More sharing options...
Hal Posted June 10, 2010 Author Share Posted June 10, 2010 I have my Parts Guy working on this as well. He found them in th system but is unable to order right now. He is going to periodically check asn as soon as they become available he will order me a set. I will keep everyone posted. Might be a while since they are not currently an option in this country. Might have to wait till the 2011's are out for local dealers to be able to get the parts. Quote Link to comment Share on other sites More sharing options...
SageTC Posted June 10, 2010 Share Posted June 10, 2010 Hal, Thanks! I have ordered and received the set from Trevor. I'll be installing in the next week or so... Quote Link to comment Share on other sites More sharing options...
TCBob Posted July 28, 2010 Share Posted July 28, 2010 How long to receive them? What is the cost in US $? Quote Link to comment Share on other sites More sharing options...
103west43rd Posted November 29, 2010 Share Posted November 29, 2010 The rear door panels were the first item I changed when I bought my Transit Connect last August. I purchased them from Adrian Steel, www.inlad.com. They do not have the netting. They were meant for adding a few extra inches when carrying a six foot ladder inside a van with a partition. I just checked the Adrian web site and they do not seem to list the panels. Still might be worth the call/email. The cost was $79.39 Quote Link to comment Share on other sites More sharing options...
JWWOODY Posted November 29, 2010 Share Posted November 29, 2010 I JUST BOUGHT AND RECEIVED A SET OF DOOR POCKETS ON E-BAY. BID WAS 99 CENTS WITH SHIPPING OF $12.95. I ADDED A COUPLE OF SELF TAPING SCREWS AND BUNGEE CORDS AND THE POCKETS HOLD AERSOL CANS AND SMALL CONTAINERS. WOODY Quote Link to comment Share on other sites More sharing options...
TCBob Posted November 30, 2010 Share Posted November 30, 2010 The agent I spoke with at Adrian said they were not available. I don't have a lot of confidence in his answer because he seemed unsure about what I was asking for. Do you have any Adrian part numbers? Quote Link to comment Share on other sites More sharing options...
fordbuff Posted January 4, 2011 Share Posted January 4, 2011 These door pockets are nice. But they don't look like they hold an awful lot. I like to carry around a few rolls of paper towels and cleaners. Being a cheap SOB I just removed the door panels and cut them down a little above the halfway mark. Now I can fit all sorts of stuff in there !! Quote Link to comment Share on other sites More sharing options...
103west43rd Posted January 5, 2011 Share Posted January 5, 2011 The agent I spoke with at Adrian said they were not available. I don't have a lot of confidence in his answer because he seemed unsure about what I was asking for. Do you have any Adrian part numbers? The Adrian catalog number was ASSLPTC. Quote Link to comment Share on other sites More sharing options...
TCBob Posted January 5, 2011 Share Posted January 5, 2011 Thanks. They are also being offered on ebay by Masterack without the netting. However, I don't see them on Masterack's website. I think the netting is very useful. Quote Link to comment Share on other sites More sharing options...
craziebob Posted January 18, 2011 Share Posted January 18, 2011 (edited) I too got set off ebay, with out netting, think cut the inserts cover that came just a little under half way, netting do look cleaner. Edited January 18, 2011 by craziebob Quote Link to comment Share on other sites More sharing options...
Mcdonaho Posted January 22, 2011 Share Posted January 22, 2011 Just ordered mine from Trevor. Looking forward to getting them and installing. Morgan Houston, TX Quote Link to comment Share on other sites More sharing options...
Mcdonaho Posted January 28, 2011 Share Posted January 28, 2011 Installed mine today took all of 5 minutes!! These are Great!! Quote Link to comment Share on other sites More sharing options...
richbiby Posted August 19, 2012 Share Posted August 19, 2012 Any additional information on these door pockets? are they now more available in the US? Quote Link to comment Share on other sites More sharing options...
103west43rd Posted August 19, 2012 Share Posted August 19, 2012 Adrian Steel still has the door panels (without netting) to give you a few more inches of room carrying 6 foot ladders inside the van. Ford has a door panel for the right rear door with netting standard in the XLT premium model, meaning you can order it from Ford. I have not checked, but door panels with netting may still be available on eBay. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.