thmtrx Posted December 9 Share Posted December 9 (edited) Has any one added a second row seat 2017 Ford Transit Connect cargo van? Cannot figure out how the seats would be anchored to the floor. There are three hooks in the floor n the right places, but cannot find picture of how the seat connects to them in the back or in the front. If someone has done this would like to see detailed photos posted of the floor mountings front and back of the 2nd row seat. Thanks! Edited December 9 by thmtrx add pictures Quote Link to comment Share on other sites More sharing options...
Don Ridley Posted December 11 Share Posted December 11 The rear seats clip into brackets that are on the edge of the footwell on the front (covered by the black plate in your photo), and brackets in the back (that are shown in your photo). Here are photos of one of my rear seats flipped up into the vertical postion. Quote Link to comment Share on other sites More sharing options...
Double Nickels Posted Friday at 02:45 AM Share Posted Friday at 02:45 AM Quite a job. You will need everything that you can find and strip from a donor vehicle. Mounting brackets, carpet kit, seat belts...... you should be able to do it. Quote Link to comment Share on other sites More sharing options...
windguy Posted Friday at 03:42 PM Share Posted Friday at 03:42 PM On 12/8/2024 at 4:53 PM, thmtrx said: Has any one added a second row seat 2017 Ford Transit Connect cargo van? I added a jumpseat to my 2015 Cargo. See the link below for discussion. I never ended up using the seat as the reason for needing it went away. At the time I needed something for carrying a third person short distances as a rare occasion. This low cost solution worked for me but it has some obvious caveats. Good luck! Quote Link to comment Share on other sites More sharing options...
thmtrx Posted Sunday at 04:21 PM Author Share Posted Sunday at 04:21 PM (edited) On 12/11/2024 at 6:07 PM, Don Ridley said: The rear seats clip into brackets that are on the edge of the footwell on the front (covered by the black plate in your photo), and brackets in the back (that are shown in your photo). Here are photos of one of my rear seats flipped up into the vertical postion. was this the short wheelbase cargo van (104 inches) or the long wheelbase cargo van (120 inches) i cant see how the middle seat will fit into the SWB cargo van On 12/11/2024 at 6:07 PM, Don Ridley said: Edited Sunday at 05:32 PM by thmtrx Quote Link to comment Share on other sites More sharing options...
thmtrx Posted Sunday at 04:27 PM Author Share Posted Sunday at 04:27 PM don: great pics thanks! can you take a few pics of the rear mount part of under seat that snaps or hooks into the van floor rear seat mount? cannot see what it looks like so i can find the right part . thanks! Quote Link to comment Share on other sites More sharing options...
Don Ridley Posted 2 hours ago Share Posted 2 hours ago Yes, I have the SWB van. The brackets for the front of the seat assy appear to be welded on the higher section of the floor (not under your black plate). Ignore the wires in the photo. They are for aftermarket heated seats. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.