dbcooper

You will never see a solder joint in aviation because they fail due to vibration. Crimp connectors only.

That one is currently unavailable. This one is. https://www.amazon.com/gp/product/B006NZTZLQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I'm on a Mustang forum and people are changing all sorts of things in the BCM using a program called Forscan.Its working with a lot of other Ford products NOTE: x's are not to be changed (ignore), just change the positions indicated by letters/numbers/? Description Module Line Action Contributor/Verified By: 12v Powerpoint Timeout (Default) BCM 726-39-01 : 1194 xxxx xxxx Enable (Default-74 minutes 44 seconds) 12v Powerpoint Timeout (Immediate Timeout) this changes the 12v power outlets on the dash and in the center console BCM 726-39-01 : 0001 xxxx xxxx Calculate different timeout periods DeltaNu1142 Auto-Relock - If you unlock your car by remote/fob, but don't open a door, then vehicle re-locks after 45 seconds BCM 726-15-02 : 0101 0101 01xx Enable solodogg Auto-Relock Option in Instrument Cluster (Note: must set Auto-Relock to enable in BCM also to get auto-relock option to work) IPC 720-01-01 xxxx ?xxx xxxx Change ? To: 1-Disabled (off-default), 5-Enabled (on) solodogg Base->Sync3 Swap, Enable Drive Mode Toggle EB&V6 ABS 760-02-02 : xxxx 1xxx Enable Base->Sync3 Swap, Enable Drive Mode Toggle GT noPP ABS 760-02-02 : xxxx 3xxx Enable Base->Sync3 Swap, Enable Drive Mode Toggle GT PP ABS 760-02-02 : xxxx 7xxx Enable Base->Sync3 Swap, Enable Drive Mode Toggle Part 2 IPC 720-06-01 : xxxx xxxx x8xx Enable Base->Sync3 Swap, Fix Hazard Toggle BCM 726-29-02 : xxxx xxx0 xx Enable Blindspot Option on IPC - Enable/Disable (if you have the driver/passenger Blindspot mirrors) IPC 720-03-01 ?xxx xxxx xxxx Change ? To: 2-Disabled (off), 6-Enabled (on) solodogg Cross-Traffic Alert (Note: This only changes what is displayed on the Instrument Cluster, you still not hardware changes for functionality) IPC 720-01-01 xxxx xxxx ?xxx Change ? To: 6-disable, 7-enable Door Ajar Chimes IPC 720-01-02 : xx?x xxxx xxxx Change ? To: 0-Disable (off), 1-Enable (on-default) gt_stang Double Honk Reminder (Engine On, No Keyfob) BCM 726-41-02 : xxx? xxxx xxxx Change ? To: 0-Disable (off), 1-Enable (on-default) AngelDeath Engineer Test Mode https://youtu.be/StYM-b8cos8 Press and hold Left 'OK' button on Steering Wheel, Start Car, Continue holding Left 'OK' button until Engineer Data shows on Instrument Cluster NasaStang Lights - Fog Lights Off with Turn Signal BCM 726-28-02 : xxxx x1xx xxxx Enable AngelDeath Lights - Fog Lights Stay On when using Turn Signal BCM 726-28-02 : xxxx 0000 xxxx Enable AngelDeath Lights - Simultaneous High Beams & Fog Lights BCM 726-27-01 : xxxx xxx0 xxxx Enable AngelDeath Lights - Simultaneous High Beams & Fog Lights BCM 726-27-01 : xxxx xxx1 xxxx Disable AngelDeath Line-Lock Enable/Disable (GT Only) ABS & IPC Must enable/disable on both modules Enable/Disable using the FORSCAN Drop-down menus dave- MFT - Navigation Enable (Note: You still need a Nav license file and the Nav SD card installed in your car-See separate Tab at bottom for steps) APIM 7D0-01-02 x?xx xxxx xxxx Change ? to: 0-Disabled (off), 4-Enabled (on) solodogg MyColor Power - Door Sills : Convertibles Only (allows you to control the color of illuminated door sills) BCMB 7B7-01-01 : xxx2 xxxx x3xx Enable Nemesis911 MyColor Power & Support BCMB 7B7-01-01 : xxx0 xxxx x0xx Disable MyColor Power & Support (hardware required) BCMB 7B7-01-01 : xxx2 xxxx x2xx Enable Navigation In Motion - Enable/Disable (Note: This will also disable Sirius Travel Link/911 Assist) APIM 7D0-02-01 : x?xx xxxx xxxx Change ? to: 5-Disable (off-default), 7-Enable (Non-US Region) Panic Alarm On Fob Disabled BCM 726-37-01 xxxx xxx0 xxxx Disable Panic Alarm On Fob Enabled BCM 726-37-01 : xxxx xxx2 xxxx Enable Panic Alarm On Fob Requires 2 Presses BCM 726-37-01 xxxx xxx1 xxxx Enable Police Dark (Stealth) Mode - keeps your interior (and Pony) lights off when you enter/exit/turn off vehicle BCM 726-32-01 : xxxx x?xx xxxx Change ? To: 0-Disable (off-default), 1-Enable (on) AngelDeath Rear Axle Ratio (3.15) BCM 726-12-01 : 013B xxxx xxxx Enable Rear Axle Ratio (3.31) BCM 726-12-01 : 014B xxxx xxxx Enable Rear Axle Ratio (3.55) BCM 726-12-01 : 0163 xxxx xxxx Enable Rear Axle Ratio (3.73) BCM 726-12-01 : 0175 xxxx xxxx Enable Rear Axle Ratio (4.10) BCM 726-12-01 : 019A xxxx xxxx Enable Rear Parking Aid Option on IPC - Enable/Disable IPC 720-02-02 ??xx xxxx Change ?? To: 08-Disable (off), 1A-Enable (on) solodogg Remote Window Open - Press and release unlock on fob, then press and hold unlock button (NOTE: Remote Window Close will not work due to hardware limitation) BCM 726-17-02 : x?x? x?x? x?xx Change ? To: 0-Disable (off-default), 1-Enable (on) Redraven571 Secure Idle - Enable (Automatics Only) BCM 726-42-01 : x1xxx xxxx xxxx If car is running and fob is removed, shifter can't be moved from Park Speedometer Correction - Change tires/rearend BCM 726-12-01 : xxxx ???? xxxx Change ???? To: value as calculated in the link to the right Spart Stereo Extended Play APIM 7D0-01-01 : xx?x xxxx xxxx Change ? To: A-Off, 2-20 minutes, 3-30 minutes, 4-40 minutes, 5-50 minutes, 6-60 minutes Sync 3 - Change colors of buttons on bottom of screen (volume overlay and music track progress bar colors also change) NOTE: You will now get 'Ford' shutdown screen APIM 7D0-03-01 xxxx x?x? xxxx Change ? To: x0x2 dotJake Sync 3 - Display Soft Climate Buttons (Seat Cooling & Heating & Heated Steering Wheel) on Home Page APIM 7D0-01-01 : xxxx xxxx x?xx Change ? To: 0-Disable (off), 1-Seat Cooling, 2-Seat Heating/Cooling, 3-Seat Heating, 4-Heated Steering Wheel, 6-All Sync 3 Startup Animation APIM 7D0-02-01 : xxxx x?xx xxxx Change ? To: 2-Ford, 3-Black Label, 4-Raptor, 5-Mustang Pony, 6-Mustang GT, 7-GT350 Gray, 8-Vignale, 9-GT350R Red, A-Ford Tire Mobility Kit Option on IPC - Disable/Enable IPC 720-03-02 ?xxx xxxx Change ? To: C-disabled (off), D-enabled (on) solodogg TPMS (Tire Pressure Monitor System) - Disable/Enable BCM 726-08-01 : x?xx xxxx xxxx Change ? To: 0-Disable (off), 1-Enable (on-default) Turn Signal - Hyper-Flash Disable (turns off the quick flash of turn signal if you have a turn signal bulb out/broken - great for folks upgrading to LED bulbs) BCM 726-27-01 x?xx xxxx xxxx Change ? To: 1-on (default), 0-off (no hyperflash) D24112 Turn Signal - Lane Change # of Flashes (quick/temporary movement of turn signal lever) SCCM 724-01-01 : xxxx x?xx xx Change ? To: 0-3=1 flash, 4-5=2 flashes, 6-7=3 flashes, 8-9=4 flashes, A-B=5 flashes, C-D=6 flashes, E-F=7 flashes Vehicle Chimes Location (where vehicle chimes are heard from) IPC 720-01-01 xxxx xxx? xxxx Change ? To: 0-Internal IPC speaker, 4-ACM/Vehicle Speakers (default) solodogg VIN # BCM 726-09-01 VIN #: (first 5 characters in ASCII converted to Hex) fionic VIN # BCM 726-09-02 VIN #: (character 6 of VIN in ASCII converted to Hex) fionic VIN # BCM 726-10-01 VIN #: (characters 7-11 in ASCII converted to Hex) fionic VIN # BCM 726-10-02 VIN #: (character 12 in ASCII converted to Hex) fionic VIN # BCM 726-11-01 VIN #: (last 5 characters in ASCII converted to Hex) fionic

Under warranty, xmsn removed and case halves resealed on the bench. Didn't pick it up yet. Hope there are no issues that come from this.

Have the same. Let me know if you get it resolved.

On my 2015 I found that if you lock the doors with the switch on the door the mirrors will not fold. If I use the remote or wireless key pad the mirrors fold. How's that for bringing an old thread back to life?

If you just turn on the a/c and don't hit recirculate or max a/c your cooling down outside air.

I've come to the conclusion that I would have to make something myself as all the commercially available screens just don't cut it.The combination of plastic and metal precludes the magnet type working very effectively. Thinking of a "sock" type set up that would go over the door and have a magnet base on the outside. Still in the thinking about it phase...

No, that's what allowed me to use led strips.

Like it. 1.8 watts per fixture vs 5 watts with the stock bulb.

Guess he wants to keep it a secret. Here is what Phase One of my interior lighting upgrade. Can't wait to see it at night...

What did you buy and how did you wire it?

Make HVAC controls look just like a radio? I'm old school not used to to controls on the steering wheel. Reach for the volume and turn the temp control .

That's looking good.I think would extent the stripes onto the first part of the roof. Make it look like it's going the whole way....