Jump to content
Ford Transit Connect Forum
   

Interior Liner--


Recommended Posts

Hi all, I have a 2020 Transit Connect and am enjoying doing a "van build" with it! It is not metal inside, it has the liner.  How does one put up hooks on the wall with a liner? I have used velcro to place some little curtains up; being light weight, they stay well. But I wish I could fasten a couple things to the walls/ceiling and don't know how. I also know I have to be careful near the front about the airbags, to not puncture the walls up front and maybe setting off the airbags. I'll put up a couple pictures to give an idea (this shows the ceiling, that includes the lining I'm talking about). I am also going to copy this post and place in another topic area that may be more correct. I can't find answers to this anywhere! Everywhere I look they show the cargo vans with the metal interior, not lined as I have. Thank you!

 

 

IMG_6017.jpeg

IMG_6015.jpeg

Edited by Gtrgrl
Want to remove pics
Link to comment
Share on other sites

  • 1 month later...
   

Who would take out the headliner and insulation inside of a camper?  When you build a cargo van into a camper, insulation is one of the things you add.  If you have a passenger model that came with a headliner, there are airbags in there.  

Link to comment
Share on other sites

The headliner is soft and will not be able to hold much weight.   You can easily get common hooks from a hardware store.  They usually have them for closets, bathrooms, and such.  You can easily attach them with hollow wall hardware, the same way someone would mount a hook on the wall in their home.  But once you put a few pounds on it, it will probably fail.  

Link to comment
Share on other sites

GG - maybe you can be more specific about what you want to do. 

Hang from the ceiling, side or both?

A single mounting point or several?

Are you thinking a disco ball or some gator paraphernalia?

 

I would agree with Fifty150 that anything with weight will sag the liner and eventually fail.

I have a cargo van so I'm not very familiar with the wagon model liner but I do have some thoughts.

 

If you want to mount from the ceiling, perhaps you can use one of the mounting points for the plastic fasteners, right above your head in your pic.

I had to remove a few to lower the headliner above the cab area on the driver's side to replace a parking aid speaker. See pics below.

Those anchors are in there pretty good. I had to tug on it and lever it out. One option is to use that to hang something from, wrapping it around the fastener.

Or, if you need something beefier, I guess you can remove one, tap the hole to add threads and then add a threaded bolt. That would offer super holding power.

Might be a bit difficult to do with the headliner in place but doable. Just some thoughts.

 

423759466_headliner-rearspeaker05.thumb.jpg.4583b4bf43c51a1c9d08e4cbfb2f9768.jpg645431716_headliner-rearspeaker06.thumb.jpg.75445ef5afaa80e3b890706e30b00a5c.jpg

 

 

 

 

Link to comment
Share on other sites

11 hours ago, Gtrgrl said:

Don't think y'all understood my question, but that's okay. ☺️ Talk later! 

Right. My post doesn't make any sense without the L0stNTransit's/t0astervan's comment that had been deleted.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...