Precisionair
T.C. Member-
Posts
55 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Everything posted by Precisionair
-
It will work. Installed the kit on my 2020 TC
-
I popped off the cap on the end and saw this inside mounted to the windshield...wondering if this is at least a part of the factory mirror mount... although your monitor weighs more than my dash cam, your aluminum mount and the plastic housing seem to work fine together... really appreciate you getting back to me on this... and while I’m here, I also have a 2013 TC that has an abundant source of chrome and stainless trim from multiple vendors... I can’t even find chrome mirror caps for the 2020, and I’ve looked at UK vendors as well... ... anyway, thanks again. Regards, Woody
-
Very nice mods! I have a 2020 cargo van - no back windows, & with the same windshield "box"... What did you use for a mount for that monitor? Im wanting to use a "Blendmount" for my Blackvue dash camera and as you know, there is no mirror or stem to mount to. Any info you could share would be highly appreciated. Best Regards, Woody Harnell
-
Traction control button
Precisionair replied to Stuckintransitconnect's topic in 2002-2013 Ford Transit Connect
Installed this switch to interrupt power to traction control module located under console... Works great, but warning light remains lit in instrument cluster until restart -
Your welcome windguy! And yes '13, they come with a matching sleeve for the arm rest, and they do indeed have seat back pockets... Your going to love the way they look...
-
Doesnt make me sweat if that's what you want to know... Same material that wet suits are made from... It's a soft fabric... Had mine 15 months now and still look new...
-
Yes, try " CoverKing ". I have a set of their custom blue/black neoprene seat covers in my 2013 TC... Fit like a glove... Worth every penny. Regards, Woody
-
Pull enough amps through a loose connection or terminal and they will overheat and burn.
-
Your Transit doesn't come with a cabin filter, but does have a place to install one. It's located below the passenger side wiper cowl. With the hood up, remove the screws securing that part of the cowl and remove. Remove the plastic square hole grate that covers the filter bay. Install filter & either keep or discard the grate, as it will not re-install with filter in place. Fram makes one that's a carbon hybrid for odor control... Part # CF9118A
-
The blower motor only has a single speed winding, which is high speed. In order to get slower speeds out of it, a resistor bridge is used, which reduces the current to the motor - and slowing it down... Sounds like you lost this resistor pack, which is located under the passenger side dash.
-
It has a timing chain... Not a timing belt... I think it was in '07 when the 2.0 engine evolved to a timing chain... With quality oil and good oil change intervals, those chains can last into the 200K mile zone... (:
-
When I looked at it, the sounds of two ***** arguing plays in my head..
-
How to Replace a Gas Filler DOOR???
Precisionair replied to Oneida101's topic in Exterior Parts & Panels
Your welcome.... Anytime... -
How to Replace a Gas Filler DOOR???
Precisionair replied to Oneida101's topic in Exterior Parts & Panels
Send me your email address to: Precisionair1@gmail.com -
How to Replace a Gas Filler DOOR???
Precisionair replied to Oneida101's topic in Exterior Parts & Panels
I have a shop manual (not a body manual) that I can check when I get home.. If I find anything useful, I'll post it. Regards -
If it's the silver calcium battery, it may be defective... My 2013 TC did the same thing, but at 8500 miles. Jumped it off, took to dealer, and they installed a new battery.... Otherwise, it may be an open fuse link, loose connection @ starter, defective key switch, or gear select interlock switch, to name a few... Let us know what they find... Regards, Woody
-
Question on swapping out OEM Radio
Precisionair replied to Karey Watson's topic in Audio, Navigation and SYNC
It was the "Metra" kits I tried; two of them... Didn't work.... at least for the Nav unit... They might work for single DIN units though... -
Question on swapping out OEM Radio
Precisionair replied to Karey Watson's topic in Audio, Navigation and SYNC
After several ( mounting kits) I purchased didn't work, I had a Kenwood Navigation head unit I purchased online installed at audio depot... They, as well as most car audio facilities, will have the proper mounting, antenna adapter, & trim to fit your TC. My TC is a 2013 and it looks factory installed, and they even integrated the steering wheel radio controls to work with the Kenwood. (with an adapter module) Good Luck! -
Rare European Transit Connect Parts
Precisionair replied to zombiechad's topic in Transit Connect Parts For Sale
Heck, I'll take them both.... Regards, Woody -
Rare European Transit Connect Parts
Precisionair replied to zombiechad's topic in Transit Connect Parts For Sale
I'll take the top pictured 3rd brake light with full harness... Do you have a PayPal account? Regards, Woody Harnell -
I too like the rack, (I think "American Van Equipment"! Sells them.) I am also an HVAC contractor down here in Texas, and if interested, we could share how our Transits are equipped photos? I have a Katerack and several custom stainless and diamond plate aluminum items inside that helps keep service work organized, as well as efficient in night time service calls... Let me know. Best regards, Woody Harnell