Jump to content
Ford Transit Connect Forum
   

Leaderboard

Popular Content

Showing content with the highest reputation on 03/01/2016 in Posts

  1. Thanks! I was able to install it without taking the whole panel down, by just skipping the dampening gear/spring. Works great and about a 5 minute install. 1. Snap off the cover 2. Snap in the new compartment (2 hole inserts on "hinge") 3. Add included trim piece behind the hinge 4. Put black button and spring into area above the trim button 5. Hold black button in and slide grey full trim button on top of it Might put the dampening gear/spring in sometime, but really it all works fine as-is. Dampening would be a nice touch, but not required... glasses aren't flying out.
    2 points
  2. Well Ladies and Gents.... after getting tired of searching for info from over seas, and/or trying to order a GAZ coilover setup from the UK for my 2015 TrannyVan. After mucho research, parts cross referencing at Ford .... I've ALMOST nailed down the perfect setup... with slight modification of course. Still hunting for that TRUE bolt on rig that requires the LEAST amount of modification, which leads me to this: Was curious if you guys wanted a write up, considering I took TONS of pics and busted quite a few knuckles in the process. The picture upload format for this forum is...um...well... terrible to deal with, but if I get enough interest I'll definitely go through the trouble. Here's a few pics of the finished product attached below (with better shoot coming soon) - Hope you guys dig it EQUIPMENT: MEGAN RACING EZ STREET@ coild over setup 18x9 ROTIFORM VCE Monoblocks on 205/40's
    1 point
  3. Good to know about the over seas popularity and long production span (2002 to 2013?) of the pre 2014 design, as well as that the focus shared the same motor/tranny and I guess (?) suspension parts. This not only bodes well for parts and accessories, but also that many bugs were worked out. What span of years of Focus was that? And so over seas the TC didn't feature this motor? Did they use this tranny? My main accessories I'm looking to get now would be a chrome grill, chrome side mirrors covers, and a chrome non-locking gas cap door. The fact that I have to use a key to not only open the filler door, but also that I can't lock it first and later push it closed is a real hassle. I'm tall too (over 6') and the extra roof height of the older TC is a plus for that for sure. I also like that I can raise the seat height for a more comfortable ride with long legs and not feel like I'm sitting on the ground, yet no risk of hitting my head on the ceiling. Beyond all that I just like the looks of the older design, especially the squared off high aggressive look of the back, split rear doors and all. Not a fan of the single hatch door on some models. The newer TC design, while still unique, to me feels like it lost much of that distinct look, and starts to remind me more of a mini van and not a unique crossover. So isn't it that the old design only came in one wheel length and roof height here in the USA, but 2014+ models come in two different roof heights and wheel lengths? If so how does the higher roof/longer wheel base version compare in head height & cargo length compared to the old design? BTW I see a lot of the old version being used by utility and service trades. I suspect as these are sold off many will be bought by the general public and customized or turned into mini RVs, etc, so in a way you might see them more frequently on the road instead of sitting in a parking lot of fleet vehicles at some company.
    1 point
  4. Yes the Drivers Arm rest will have to go if the glove box arm rest is used.
    1 point
  5. What Part did you order? and could you take some pics of the process? Interested, to have all features I can on the wagon.
    1 point
  6. nuke

    Location of cabin air filters

    I put up a step-by-step in the climate controls forum for my 2015. (same as the 2015). http://fordtransitconnectforum.com/topic/4704-how-to-change-the-2015-cabin-air-filter/
    1 point
  7. I don't have the exact figures of the spring ratings (im sure I will in the next few days), but it rides like pretty much every application specific coil over equipped car I have ridden in that wasn't bottomed all the way out. The way I went about parts cross referencing as well, the application I chose to shop shared the SAMe EXACT part number for Coil springs in the Ford Parts catalog as the Transit Connect LWB Van. I can't delve too far into what application just yet, considering the following: I posted the above pic to the MEGAN FB page and got a response inquiring about the application I used, and I expressed my concerns about improvements/changes that could be made to the rear to basically seal the deal on this being a TRUE "suitable for retail" application to be added to their catalog. For that I want to hold off for a few days on letting out the info. I actually tried contacting the folks at Fortune Auto considering they aren't but a 20 min drive from me, but the person on the other end of the message box either had no clue what I was talking about (doubt it) or didn't want to help me with info thinking I was up to no good,after free stuff, or either assumed I was a "BS'er". I really just wanted to be able to "put hands and eyes on" to measure/eyeball the items before I purchased. I even COMMITTED to buying whatever worked while I was there. Isuppose they didn't want some dude with a VAN coming around to help add to their product line up. I have noticed a lot of folks looking to "lift" ..... I can assure you that this particular set of coil overs in the FRONT will give AT LEAST 2" lift over stock considering how much of the threaded adjustment is left on the shock body when it was set close to "stock" ride height (approx 3.5/4". Not to mention, the pre-threaded aluminum perches leave just over an inch of stud left sticking out of the top of the shock tower. I'm sure that would be good to run a solid strut spacer without an sort of worry about failure. As for the bumper - I did have them painted (came as black), and they actually match perfectly. The reason they look a different shade is that the entire van received a decent wax before adding the painted parts. Tripping to PA/NY/FL over the past 4 months without bathing it has retained dirt better on the non-waxed parts. The van actually spends more sitting in between long runs than anything. it only has 10k on the odo in right at a year of use, but its been to West NC 4 times, FL once, PA twice , NY once, and a few other... really no where that wasn't over an 1:30 one way. I need to clean it lol Here's a few I grabbed today in the rain. Excuse the rake, I raised it up a bit to load a motorcycle and deliver across town, this was on my way out of the drop off.
    1 point
×
×
  • Create New...