Chip Posted July 16, 2022 Share Posted July 16, 2022 Thanks for posting about the false floor. I've seen the passenger vans so kind of knew there had to be space under there but wasn't sure how to get into it. I had visions of having to saw through the deck! Is there also space where third row passengers would put their feet? Quote Link to comment Share on other sites More sharing options...
cathpah Posted March 6, 2024 Share Posted March 6, 2024 On 2/8/2022 at 12:57 AM, Roam Free Campers said: Discovering an issue with mine. 2020 cargo XLT. Nothing is bolted. All of the metal supports and panels are spot welded over the false floor. Was really hoping to not do any cutting. Anyone with insight on these new ones? Yep...I just discovered the same thing (and I'm in the US, so it seems it's not specific to Canada anymore). A whole lot more of a commitment to have to cut it rather than just unbolt it. Now I need to decide if it's worth doing as there's no going back. Quote Link to comment Share on other sites More sharing options...
G B L Posted March 26, 2024 Share Posted March 26, 2024 If you are committed to the project get a spot weld cutter and you can take it out neatly .If you want to go the other way it is not a big deal to weld it back in as long as a neat removal was done. Quote Link to comment Share on other sites More sharing options...
shadowcorgi Posted May 16 Share Posted May 16 I am a 2016 cargo version owner and I bought a a set of the second row bench seats. Now I am wondering how to install these seats to the floor. I know that I need to do what you did to remove the false floor, but which hardware do I need to buy to mount the seats? Any opinions will be greatly appreciated! I have been searching for this information online for so long and there is no guaranteed answer. https://ibb.co/3y4Qfwx https://ibb.co/hRCkHnNN Quote Link to comment Share on other sites More sharing options...
windguy Posted Sunday at 04:14 AM Share Posted Sunday at 04:14 AM On 5/16/2025 at 11:47 AM, shadowcorgi said: I am a 2016 cargo version owner and I bought a a set of the second row bench seats. Now I am wondering how to install these seats to the floor. I know that I need to do what you did to remove the false floor, but which hardware do I need to buy to mount the seats? Any opinions will be greatly appreciated! I have been searching for this information online for so long and there is no guaranteed answer. https://ibb.co/3y4Qfwx https://ibb.co/hRCkHnNN Try this recent thread for ideas. Perhaps you can PM poster THMTRX. Good luck! Quote Link to comment Share on other sites More sharing options...
shadowcorgi Posted Sunday at 10:01 PM Share Posted Sunday at 10:01 PM 17 hours ago, windguy said: Try this recent thread for ideas. Perhaps you can PM poster THMTRX. Good luck! Thanks a lot! I read related posts including this one many times, and finally I realized that the seats I bought are for short wheel base models. So be aware my friends, do not get seats like these if your van is a long wheel base model. Now I am gonna take the harder route to make these seats fit no matter what it takes, cutting, welding, etc. Challenges are annoying but also fun. Cheers! windguy 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.