DonShockley
-
Posts
493 -
Joined
-
Last visited
-
Days Won
51
2 Followers
About DonShockley
Recent Profile Visitors
Single Status Update
See all updates by DonShockley
-
Don,
I was reading your post about adding a separate fuse block. I have been looking for the connectors that will plug into the back of the OEM fuse block (mfg by Lear) and I think you have something that works/fits. In the photo of the added fuse block you purchased from Waytek (Delphi) that are crimp connectors that plug into the added fuse block body. I think these connectors will fit into the back of the Lear OEM fuse block (2.8 mm format or series 280 connectors). Can you try one on a empty slot?
I have ordered some Lear connectors on eBay. It is a tray of assorted connectors including several that appear to fit the fuse block in the TC. It would be nice to find an actual source for the connectors. Like you I am financially invested in this project. I am determined to tap directly into that OEM fuse block!
Thanks,
Don Ridley
- Show previous comments 3 more
-
Good news, success! But I was wrong about the 771016 type connectors. They are too large. But the connector kit I ordered on eBay had the right ones: 1-968857-3 and 1-968859-3.I tested one and it fits perfectly. These numbers don't match anything on the Lear document but I think it is the MAK28 terminal. I have about 20 ea for small gauge wire and 20 ea for larger gauge wire. The kit is assembled by Kent-Moore and is part of a huge terminal kit for GM mechanics ($1000+ for the entire set). The Lear terminals are Tray 7. If you want to source the connectors you can call 1-800-GM TOOLS (as shown on the kit) and ask for the numbers listed above. Or it may be easier to buy the kit on eBay for about $40. Just make sure you get Tray 7.
I noticed the aux fuse box has different empty fuse slots. Some have dual contacts on the power side and appear to be for higher amperage fuses and circuits.
I can't attach any more files. Send me an email: dondumaine@surewest.net if you want info on the Kent-Moore terminal kit.
-
I found those part numbers over at Mouser.com a company I bought components from before when I was building DIY computer cables and LED flashlights a few years ago. The 57s have a 100 minimum at $0.26 each, but the 59s are available as singles for $0.46, although the price drops to $0.35 at 100 qty.
-