daneli
T.C. Member-
Posts
21 -
Joined
-
Last visited
-
Days Won
2
daneli last won the day on October 20 2015
daneli had the most liked content!
About daneli
Profile Information
-
Region
U.S. Great Lakes
-
Ben H Orchard reacted to a post in a topic: Left front axle leaking transmission fluid
-
Good news on the TSB! (I searched through google but this TSB hasn't made its way to the inter-whatever yet.) This will make it much easier for Transit Connect owners in the future to get this fixed!
-
Hey! It has been about 1 month now since the new axle, bearing and seal was installed. The good news: No more leak at all! Totally dry. Also the axle movement in and out of the transmission is gone. Very good. Now the bad: An enormous amount of grease has been expelled from the CV axle. I can't find a tear in the boot so I am totally confused about were the grease is coming from. What I mean is, it is definitely CV axle grease, I just don't know how it found its way out of the boot. Maybe there is a tear that I am missing? It is really confusing. There is so much grease I could run a MacDonald's fryer operation for weeks. (Ok I know that was gross.) The service advisor wants me to bring the van back so he can take a look. Maybe we can mount a permanent webcam pointed at the driver's side cv axle/transmission so I can do easy daily inspections to stay on top of the latest developments! While this is annoying I have to say that the service people at my dealer are really very polite and helpful. In fact I think this is one of the best dealerships I've ever dealt with. I just wish we could get the the point of saying all of this is finally, totally, fixed.
-
GBL: What else do you think could be causing this problem? If the leak doesn't return I will consider the cv axle+bushing+seal to be a real fix. But even so I am confused about something: This problem seems to go back to 2009 Escapes with this same transmission. Why would Ford still have this problem with these transmissions after 6 years?
-
Got a call from the dealer that the back-ordered parts arrived. Took the van in and they replaced the inner cv axle (DV6Z-3B436-H), the seal (9L8Z-1177-A), and the transmission bushing (CV6Z-7025-C). Since these are essentially the same parts covered by the TSB for the Escapes and Fusions with the same transmission I think they are doing a TSB repair on the Transit Connect without calling it that. Anyway, I hope this fixes the leak.
-
You know it just hit me in reading over jimmyboost's post in the other thread that the transmission in our 2nd generation transit connects is the 6F35. Duh! There have been several TSB's for this transmission. I assumed that all the fixes would have been applied to the latest 6F35s installed in our vans - but maybe that isn't true. It seems likely that the leak we are experiencing is the same problem that the other 6F35s experienced and that there already is a TSB for this problem. (If we ask our service reps "Are there TSB for the 6F35 transmission" I assume they will say "Yes.") Here's another youtube video by the same Ford tech about the 6F35. What he says is a little worrying: -Replace fluid every 30,000 miles. -Don't flush, do a drain and fill only. -Use Motorcraft Mercon LV only. -Be aware that Mercon LV tends to break down quickly. -Trans filter is non-replaceable, sealed for life unit. So let me get this straight. Ford got rid of the dipstick and a replaceable filter on a transmission that is failure-prone, often tends to leak, and must use a specialized transmission fluid that breaks down quickly and is super-expensive? Hmm...
-
I'm wondering if it is possible that they have already issued an updated half-shaft to address this concern. Could that be the reason I was told I needed both a new seal and a new axle??
-
I found this video on youtube, in which a Ford tech describes the source of the cv axle seal problem on Fusions and Escapes, and describes the TSB and shows how to do the fix: According to the tech, the source of the problem on Fusions and Escapes is poor machining on the surface of the inner half-shaft. The rough surface of the half-shaft tears up the bearing and the seal that the axle mates with in the transmission, eventually resulting in a leak. I wonder if this is what is happening on our Connects too? That might explain why they said I need a new axle and why they are back-ordered.
-
Just heard back from the service advisor. He said the driver's side cv axle to trans seal needs to be replaced as well as the cv axle itself. When I dropped the car off I pointed out to them that the axle was moving in and out of the transmission about a quarter inch or so - as if the snap ring on the end of axle wasn't properly engaging with the differential. The service advisor wasn't sure if the snap ring is the problem or if there is something else wrong with the cv axle. He said the driver's side cv axle is back-ordered and won't be in for at least 1 week and that we can safely drive the car in the meantime. I hope I will get a more precise diagnosis of what is wrong with the cv axle when I bring it back to be replaced.
-
GBL: I haven't checked the level yet. Given that there isn't an actual drip but the area is just damp I will wait to see what the dealer finds. The car is going in early next week.
-
Add me to the list. Changed my oil today (13,000 miles on a 2014) and noticed oil weeping out of the driver's side trans case where the cv axle enters the case. So far shifting is fine. I'll call the dealer tomorrow and see what they suggest.
-
mustang reacted to a post in a topic: Help replacing piston rings
-
Hi Esobar. Reading through your thread it struck me that you should do a leak down test *before* you make a decision to pull the head or the complete engine. You don't have enough information yet to establish what is wrong, and removing the engine can sometimes make it more difficult to diagnose what is happening. I also think you should try to figure out what is causing your misfire before you go any further. The misfire, hard start and the low compression could all have the same cause, but you don't know that yet. Diagnosis is going to be a lot easier while the current engine is installed and running than after you remove it. There are so many things that you don't know yet and that might be behind your troubles. Here are just some examples: - Maybe you have a fuel delivery problem to cylinder #2. Maybe that cylinder is getting flooded with fuel. Maybe that wiped out your rings. (Do you smell gasoline in the oil?) - Maybe your helicoil didn't seat 100% and you are losing some compression there. (Is there evidence of blow-by past the #2 spark plug?) - Maybe you have some sort of head gasket sealing issue. (Usually head gasket leaks will show up as low compression on two adjoining cylinders, but the leak down test will tell you this - or you could get a test kit to check for hydrocarbons in your coolant.) If you don't have the equipment to do the leak down test you could have a shop do it for you. It is hard to solve ignition/fuel problems without an engine installed!
-
windguy reacted to a post in a topic: Driver side sliding door fail 2014 LWB
-
Driver side sliding door fail 2014 LWB
daneli replied to bikinchris's topic in Exterior Parts & Panels
Both our sliding doors (2014 LWB) have been very hard to open. At some point I noticed that the nylon roller that sits in the upper track had some material flaking off - like the roller was not sitting properly in the track. Also one of the spring-loaded receiver things in the B pillar that the door interfaces with in the closed position fell out. I just pushed it back into the pillar. (There are two of these in the B pillar, one at the top and one at the bottom of the B pillar. Sorry I don't know the right name for this part - is it a latch?) We took the car in for service and they did some adjustments, apparently including adjusting the tracks themselves. The doors are now effortless to open and close. I don't know if this is related to the problem you are describing or not. The service writer seemed to think that the doors hadn't been properly adjusted at the factory. -
2.5 liter engine, whats the oil capacity?
daneli replied to omniphil's topic in 2014 Ford Transit Connect
Here's the service info for the 1.6 liter engine: Engine Oil Capacity Item Specification Service fill including oil filter 4.54 qt ( 4.3 L) Service fill without oil filter 3.96 qt ( 3.75 L) -
2.5 liter engine, whats the oil capacity?
daneli replied to omniphil's topic in 2014 Ford Transit Connect
From the FSM: Engine oil capacity: Item Specification Intial [sic] fill including oil filter 5.9L (6.3 qt) Service fill without oil filter 5.1L (5.4 qt) Service fill including oil filter 5.4L (5.7 qt) -
I got these: http://www.amazon.com/Scepter-08226-Plastic-Automotive-Ramp/dp/B004XATP04