Jump to content
Ford Transit Connect Forum
   

2011 Cargo-2nd row installed


JRM
 Share

Recommended Posts

TC 2011 Cargo, bought it pretty cheap and decided to turn it into a small family van. Seats are from a 2001? Ford Windstar not really sure on the year. Decided to go with these 1. Because they were $300 cheaper then the originals 2. Loved the center console and 3. I wanted more then just the 2nd row and the lady sold me all the seats from her van seatbelts included for $100 bucks. There was welding and lots of thinking installing them but I really liked how it turned out. Opinions and suggestions are welcome. Thanks!

74886FFD-B16A-4CFE-91E5-98BE126C4809.jpeg

D4A37433-8E99-469C-8993-123DB64885C1.jpeg

CE6DCCFD-6160-4294-A7C3-A7E83A368E62.jpeg

Link to comment
Share on other sites

   
  • 6 months later...
  • 1 month later...

Hi neilthepeel,

 

The seat bases were welded to angle iron. The front 3 screws were aligned to factory settings and the back bolts and nuts aligned wherever you can find a opening that wouldn’t hurt nothing on the bottom ??‍♂️ . Hope that helps.

 

Good Luck!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...