earthTree Posted January 28, 2021 Share Posted January 28, 2021 Hello and good evening. I've had very low airflow to the windshield since I've had it. I noticed it'd gotten worse and playing with the knob caused it to worsen. Now the lowest the knob will turn is to the middle (which gives airflow to the feet) and will turn to the windshield icon but this gives airflow to the face. I can see it operates by pulling on the metal rod, i can force it to turn/pull more in either direction. I can see underneath the yellow teeth it has 3 notches I assume relate to the 3 directions, and its way out of position. No amount of twiddling will get it back into its normal housing. Any advice? Quote Link to comment Share on other sites More sharing options...
G B L Posted January 28, 2021 Share Posted January 28, 2021 What Year? Does the nob on the Dash connect directly to the cable that operates the flap or is there a servo motor? If you find out which way the nob has to be turned to extend the cable then unclip the 2 wings that hold the cable jacket and see if you get more extension. Quote Link to comment Share on other sites More sharing options...
earthTree Posted January 29, 2021 Author Share Posted January 29, 2021 (edited) HIya, its a 2006 plate, it connects directly as I'm aware. it connects to a toothed wheel which rolls on a toothed flat which is connected to the rod/cable. I have tried disconnecting the cable.. i need some needle nosed pliers. It feels as though it's the cable itself that doesn't want to be pulled. After playing with the dial there was an audible click after which the dial would only turn back halfway. I'll get some pliers and see. thankyou Edited January 29, 2021 by earthTree Quote Link to comment Share on other sites More sharing options...
Rodduz Posted November 4, 2021 Share Posted November 4, 2021 Did you fix this with pliers? Mine only blows to feet, have put console knob directly on the heater box in driver's footwell but it will not turn on either the direction or the hot/cold Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.