slp5357 Posted October 1, 2017 Share Posted October 1, 2017 I'm currently resurrecting a 2012 FTC - I bought it wrecked and have it just about completed. The front end was only marginally damaged but the air bag deployed. I replaced the air bag, clock spring and the module under the center console, but the amber dash light won't go out. Does that have to be cleared on the ECM? Any advice is greatly appreciated - Thanks! Quote Link to comment Share on other sites More sharing options...
zalienz Posted October 1, 2017 Share Posted October 1, 2017 The airbag new module will need to be armed using the appropriate scan tool and software, usually a dealership affair. Providing you did everything right, it should not be a big deal, but you'll have to pay the charge to arm the module. Keep in mind, whenever the airbag light is on, the system will not function by design. BSUPC 1 Quote Link to comment Share on other sites More sharing options...
slp5357 Posted October 4, 2017 Author Share Posted October 4, 2017 If the module, clockspring and airbag are from another vehicle, is this still the case? I thought that maybe I had to change the shoulder seat belt restraint assembly in the pillar. At any rate, thanks for the response - I'll give my local Ford dealer a call.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.