framebinder Posted January 31, 2011 Share Posted January 31, 2011 I find the warning buzzer that the seat belt is unbuckled to be overly enthusiastic. Then I read on page 93 of our owners manual that there is a procedure to shut the buzzer off. It entails turning on the ignition, but not the motor, and buckling & unbuckling the seat belt nine times within 50 seconds. I tried this several times to no avail. Has anybody else tried this? Did it work? And by the way, what's with no accessary position on the ignition? Quote Link to comment Share on other sites More sharing options...
Flying Media Posted February 1, 2011 Share Posted February 1, 2011 On 1/31/2011 at 7:59 PM, framebinder said: I find the warning buzzer that the seat belt is unbuckled to be overly enthusiastic. Then I read on page 93 of our owners manual that there is a procedure to shut the buzzer off. It entails turning on the ignition, but not the motor, and buckling & unbuckling the seat belt nine times within 50 seconds. I tried this several times to no avail. Has anybody else tried this? Did it work? And by the way, what's with no accessary position on the ignition? worked for me Quote Link to comment Share on other sites More sharing options...
LiarCatchers Posted August 1, 2011 Share Posted August 1, 2011 Yes follow instructions for both driver and passenger. If you do one and not the other, and someone is in passenger seat, it will continue to ring. Quote Link to comment Share on other sites More sharing options...
Power_Dr Posted October 19, 2011 Share Posted October 19, 2011 I tried this and it worked, but then a few days later it was buzzing again. Does this only work until you stop and start the van? or is it supposed to disable it for ever? Quote Link to comment Share on other sites More sharing options...
framebinder Posted December 20, 2011 Author Share Posted December 20, 2011 I finally had the dealer do it for me, though he made me sign a paper releasing him from liability. It still beeps, but only one time. Quote Link to comment Share on other sites More sharing options...
Jaymz Posted December 22, 2011 Share Posted December 22, 2011 I did mine. It rings one time and the light stays on. Not as bad as every 20 seconds or so like before. On 12/20/2011 at 11:19 AM, framebinder said: I finally had the dealer do it for me, though he made me sign a paper releasing him from liability. It still beeps, but only one time. Quote Link to comment Share on other sites More sharing options...
jimpurcell Posted January 23, 2012 Share Posted January 23, 2012 Thanks for the info! Quote Link to comment Share on other sites More sharing options...
Bug Man Posted May 9, 2013 Share Posted May 9, 2013 This worked well for me and THANK YOU for the enfo. Like Jay I find that it dings four or five times (one instance) when I start it up, but then it never rings again. Because I do route work I drive very slowly on back roads and get in and out constantly so I often do not connect the belt. The claxon was a real P I A so I am grateful for the help! TB Tom the Bug Man in Rhode Island, USA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.