tnoll Posted September 13, 2022 Share Posted September 13, 2022 Armrest for T C at posted link on Armster in UK. I posted pictures above. Quote Link to comment Share on other sites More sharing options...
donuts Posted January 17, 2023 Share Posted January 17, 2023 tnoll - do you have xl or xlt? does your van have the open bin, no lid etc? Thx Joe Quote Link to comment Share on other sites More sharing options...
tnoll Posted January 18, 2023 Share Posted January 18, 2023 Hi Joe-- I believe mine is an XL but with a big nav screen, why I bought it. Not sure what you mean about open bin. I have the armrest now, and a better double cup holder thing that raises it up out of the hole they have, which would make you crash trying to get your coffee off the floor : ). It took a lot of tweaking to get it to be comfortable. Believe this is the one I bought--tried a bunch. https://www.amazon.com/gp/product/B07RV2Z8RR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Quote Link to comment Share on other sites More sharing options...
donuts Posted January 19, 2023 Share Posted January 19, 2023 I attached a photo with my van's console config viewed from above. My driver seat has a fold down arm rest, there is 2 cup holders (low) and integrated into the same console plastic is an open bin for storing stuff. It has no cover. Maybe this was the XL config until they changed things in 2019. I noticed on the armster site they have a different model for after 2018. Some day I'll contact them with photo of my current console. I can't tell from their photos if the armster attaches to slides into the open bin. Thanks for the tip on the cup holder thing you got on Amazon I'll have to check that out. Quote Link to comment Share on other sites More sharing options...
tnoll Posted January 20, 2023 Share Posted January 20, 2023 That is not what I have; mine is 2019. Installing the armrest was easy; getting the fold-down arm off was not. Even five guys at the dealer could not do it following Ford engineer’s instructions. I just folded back the seat upholstery and cut the rod coming out. I was putting sheepskin covers on anyway. You may not need the cup holder if your holes are accessible. I forget if I originally had one or two, but they/it are right at the front and so far down as to be a hazard. Quite ridiculous. I ordered and sent back lots of holders as too gadgety. These were straightforward, could be turned to any position, and got the cup within reach, heightwise. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.