TC2014

Hey Windguy, do you remember the part number for these LED lights that you paid for? I've had a lot of troubles getting myself an LED replacement for the cargo lights in the back... The stock light in the back was an incandescent design. The light was not strong enough for me as I needed a lot of light in the back, I use my van for service work and it was just too weak for seeing a lot when I initially pull the van doors open. I've tried several versions of drop-in LED bulb replacements, all of them have eventually failed. It's like the boards or bulbs are made too cheaply to be able to handle whatever the van is putting out voltage/amperage wise. Eventually all of the bulbs I put in would fail within a 4 month period and start blinking like crazy. The bulbs would also get incredibly hot for some reason too. I've used these bulbs in other vehicles before and they never got that hot. My last solution to try a workaround, I got an LED board to fit the plastic housing, and hot glued a small 12v DC PC fan on the back of the board. It's supposed to be a "whisper quiet" fan but it ain't. The fan makes a vibration sound that is really loud but at least my boards never got cooked after I did that solution. After seeing your post, it would seem that this is the proper kind of LED unit to have in my van and the large heat sink suggests that Ford knows that heat was an issue for some reason. So if you know the part number, I will order it from Ford. Thanks so much for the posting and all the photos btw.

I appreciate all the diagrams an info. I should have guessed they put everything function wise in the BCM, so this might not be as simple as I want if I'm going true OEM route... I suppose nothing stops me from trying to connect a Time-Delay-Relay to the PINS that the Push-Button interacts with. I just won't have the same function with it. Have to mull over the data and see how I want to address this. I have already determined that PIN 1 and PIN 12 are the ones on this switch that close the Normally Open circuit. Pins 6 and 8 are for the background lighting, but I'm not 100% on which is ground.

Hey folks, Got a 2014 Ford Transit Connect 2.5L XLT that unfortunately did not come with heated mirrors I know there's an OEM fix to put in mirrors but that's at minimum $800 for the parts alone so I'm trying to do something on the cheap I already have some OEM replacement mirrors with the connectors I just got in a Mk.3 Rear Defroster switch... I'm wondering what the pin-out for this bad boy is.... I'm trying to find out how the circuitry normally works on these systems. I wonder if all the power for the mirrors passes through the switch or through a relay elsewhere. Any and all information is welcomed.

On my 2014 Connect, I used the Fiesta labeled red wire for Accessory Power

If you want to replace them with something that provides more light, I found these worked pretty good. https://m.aliexpress.com/item/32600514538.html?gatewayAdapt=Pc2Msite&spm=a2g0s.9042311.0.0.105b4c4dVRHJRP https://m.youtube.com/watch?v=9CNIZxqzqMA

There are aftermarket solutions that offer a Flip-Key setups for your type of van. You're best to source one from a proper vehicle locksmith as they will provide a proper working unit and program it as well. There's all sorts of horror stories from folks buying aftermarket keys just to find out they have a defect or won't program in.

Replacement of the engine, PCM, TCM or BCM usually requires the components to be relearned with a PCM replacement protocol. With an advanced scanner you should be able to see if the keys are registered to start the engine. Some have the ability to do the replacement protocol but definitely do your research before you start anything. If you do the PCM replacement protocol, you will need 4 keys at minimum to get everything set. Transit Connects always need 4 keys in memory. If you don't have all 4, you might want to contact a local vehicle locksmith to do the work

As far as trying to swap in a newer model radio, I have no idea if that would work or not. You would have to cross-reference if the wiring is the same. I would assume if there isn't too much of a change from the wiring and the design of the radio itself, I wouldn't see why not. If you end up doing that swap, and you are successful, give us some photos and a blurb. I'd be curious to know if it would work.

Gentlemen, I thank you for your patience. I had forgotten to check back and update you all on what I discovered. Let me get around to answering all the questions: Firstly - Yes, I was able to successfully place an aftermarket radio into my 2014 Transit Connect. Due to the price and options of the aftermarket radio I picked up, this is why I had to do my own wiring. The radio is some kinda knockoff Chinese manufacturer that has a lot of features I was looking for: GPS, Bluetooth connectivity, Built-in Microphone, Auxillary 3.5mm jack, even a CD/DVD player, as well as physical buttons and a dial for controls. Sadly it isn't perfect. There's ton's of usability issues like the radio might toggle to FM radio if I press the Bluetooth input button, and the GPS is a frustrating joke, not to mention it is impossible to set the time on it but given the price I've just had to live with it. I desperately needed Bluetooth over everything else so at least I got that going for me, which was nice. Otherwise I would not recommend it. https://www.amazon.ca/gp/product/B0792V5KZN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Now getting to the crux of the issue at hand - the dreaded ACCESSORY wire we need for all of our aftermarket radios to work. I ended up stumbling upon the Metra 70-5524 for the Ford Fiesta 2011-(and up) from Amazon https://www.amazon.ca/gp/product/B00ANAHEQU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 That harness has the proper position on the RED wire which connects with the OEM Ford ACM Harness ACCESSORY wire so the radio will turn on when the IGNITION has been turned to either ACCESSORY or ON. I did not make note at the time of what PIN position the read wire was on in comparison to the other wiring harness I had used before. I know the PINs can be re-arranged if you have the correct pick tool if you have the patience for that

Much thanks, I will take some time to peruse the data and see what I can get set up for myself. I'm hoping a direct connection of the wires to the harness will give me a fully functioning aftermarket stereo. I will update when I have any progress.

Much appreciated for the information. Is there a PIN-out diagram for the main wiring harness as well? I don't think I need to mess around with the ACM but I could be wrong.

I've decided to get myself an aftermarket unit to replace the very basic stock radio system in my 2014 Transit Connect. The stock radio unit I have has AM/FM/AUX, 2 front speakers. Nothing else. No steering wheel controls or native navigation systems. There is one main plug harness that connects into my current vehicle stereo. Other connections are for the Air Bag light, 4-ways and radio antenna. Unfortunately, the Axxess-5524-NAV cable I got from Amazon has some of the wires designated (eg Accessory RED) that only feed out to the aftermarket radio after connecting into the plug for the Axxess NAV portion (it's a black box with a plug connector tied into it. That was just one of a few I noticed were not tied-in directly from the main harness. I suspect I need everything correctly connected between the main harness and the radio connector to make it work right? I also didn't see where the wires designated for the CAN-Bus line of my aftermarket stereo tie into this Axxess harness. Does anyone have a wiring diagram for these radio connector harnesses that I could use to connect the wires from the aftermarket stereo harness to the vehicle harness? Or should I be looking to buy a different wiring harness all together? I will include photos both of the stock unit and of the aftermarket bundle Stock Connectors and Wires Stock Radio Wiring Harness Aftermarket - Axxess 5524 NAV wiring harness Showing the aftermarket radio connector on the far right Aftermarket radio harness is now on the far left. Notice how the Red wire (Accessory) does not connect into the main harness? A few others are not connected to the main harness either. Any help or recommendations would be greatly appreciated. I've tried glossing over the forums here but did not see this topic covered.

Perhaps you could point me in the right direction. I have the most basic of TC radios (AM/FM/Aux) there are no steering wheel controls or navigation. I want to plug in my aftermarket radio to the single radio plug I was provided. I got the Axxess 5524 NAV cable but discovered, for some weird reason, that not all the wires are plugged into the main harness... They run in between some other black piece and then tie back into the aftermarket radio bundle. Am I supposed to plug that black piece in to get the radio to function? I see the red wire is marked for accessory but if that isn't tied into the main plug bundle, how does it get power? To simplify me questions: Do you have a place I could buy the same harness you have pictured? Would it be possible to pin the wires to the main connector plug and bring full function to the aftermarket radio? I've included some photos of both the stock wiring plugs and the aftermarket converter.

Hi All, 2014 Ford Transit Connect XLT, new owner here. I have the sidewinder/laser/HU101 track key system on the vehicle. There is one entry lock on the driver door. This is the style of lock that is housed within the door handle. From appearances, there seems to be hardware mounts and such similar to the driver door on the passenger door. I am interested in having keyed access at the passenger door up front and 2 of the cargo doors in the back. Has anyone here tried to add more locks to their vehicle?

Yes, that is the norm going forward at least for the later model TC. They need a minimum of 4 keys registered vs the 2 keys you normally need for most of the other Fords.

Possibilities are as follows: - If you mean that the key itself will turn to lock the driver door but not to unlock the driver door, the door lock needs servicing. Tibbe key locks can turn to lock with any key but not to unlock. Even the other style of laser cut key can falter allowing locking but not unlocking. - The button on your FOB could be kaputz - The battery on your FOB could be dying, and once your battery starts getting weaker, certain features get disabled - Wiring issue to the door lock actuator (the piece in the door that clicks into the door jamb to close the door and keep it closed) - Defect in the door lock actuator Also I just joined so sorry if this response is late. Idk if this helps you out or if you managed to solve it yourself but at least it's something.