Jseda

IPC = Instrument Panel Cluster module

Hello Don, I did the change today but didn't work for me, the ipc still the same, Ford logo and blue background But mine said 0000 0004 C9 before and now 2901 7004 C9. First I only changed 0004 to 7004 but no change.. then change to 2901 7004 but no changes also...

Could be that change...! I just checked my TC and before I had 0001 2A and now I have 0142 6C. When I installed my new steering wheel with buttons also I installed the cluster from the same TC as the steering wheel but I just made a change in the BdyCM main, so my ipc came with the cruise control setting already..!

Wow I don't know what else could be... I just Change only the CC option to with Cruise control. I don't remember any other change...

Ok, When you press On/Off on the CC buttons, so you see anything change in the IPC display ...? Like a new symbol?

I did the same change in cruise control but I didn't Change anything in adjustable speed limiter. I think mine was in not configured

Can you post a picture of the forscan screen with the list of your modules...?

That's different to my case because I'm using an aftermarket Android headunit. You have the original radio.. Did you try pin 5 from steering wheel to pin 7 fcdim...? And pin 6 steering wheel to ground..?

Yes , I did I have a picture before remove original cluster so I will add what ever run before Change it ... Do you know I what other module are stored.. to read it with forscan..?

Don Ridley, Thanks a lot for your help..! Here is my before and after pictures. Everything working, just need to update later the mileage to the actual and will play a little with the asbuilt to change the black background to compare.

Yes I pushed the wire into the pins inside, didn't use connectors, just cut the wire tips straight and pushed in... if I find the right plug from a junkyard later I would like to put the 2 pins to the plug... Yes , it is Atoto S8 gen2 standard 8" floating screen ,single din chassis..

I just confirmed my theory...! Steering wheel radio control buttons works without any SWC adapter..! I connected mine directly from clockspring pin5 to the back of my aftermarket Android headunit SWC key1 wire ,don't need the other swc key# wire to be connected .. and from clockspring pin6 to ground. My 2014 TC XL didn't came with those wires in the harness because came with basic radio am/fm and no buttons on the steering wheel.! This picture is the clockspring plug where I added to wires

I tested the pins in the clockspring and they gave me different resistance on each button when pressed...! I just need to find a plug to pull those 2 pins to make a little harness to the key1 wire of my radio and the other pin to ground. I you get another speedo cluster , try to find one with less mileage than your... then with forscan you can add the remaining mileage to match your current one.. you can change it with forscan.. just adding, you can't lowered.

Hello gossipninja Any luck with your radio...?

Check your new harness to check is you have that pin match to pin 3 in original harness...?

Yes I just noticed that looking your plug... you are missing the 12v acc/ignition that's why your radio doesn't turn on..

Did you wired this one...?

Yes you would need to connect pin 5 (C218A) to pin7 in (C2123) Pin6(C218A to pin10(C2123) C218A in clockspring C2123 IN FCDIM I DOUBT will work connected to HS-can I was checking the pictures you sent me and I believe that what you are missing so far... I think should work.. I my case would be different because I don't have the fcdim , I need to connect from clockspring directly to my radio SWC input... but I need the 2 pins to add them to plug C218A.....

Should be blue-white and the other gray-yellow

That's C2123 plug Check if that plug has 10 wires..?

That happened to me , the problem was the male pins solder to the board assembly, I did a hole I the plastic close to the pins and soldered it back to the board and no problems so far....!

Yes , if you get the plug you just need to add 2 pins to your existing plug... but you will need to check the plug of your fcdim and post a picture, so I can compare it with my wiring diagram book

I have nothing on the side of the millage..

Wow , super useful information ? I already installed my new ipc and have the welcome and the ford logo because my TC has nothing about sync, just had the am/fm basic radio.. Also if you see my IPC I don't have the compass on it, I guess is because I have no sync modules....

What radio are you trying to install, original radio or aftermarket? Did you check fuses ?