madman Posted June 9, 2012 Share Posted June 9, 2012 OK, I guess I am dumber than I thought. I just received two shelving units made by Adrian Steel Shelving. The units are AD32TC. Has anyone had any experience installing these shelves? Let me say that the instructions are poorly printed. Photos of important detail assemblies are the size of a postage stamp, and too fuzzy to see any better even with a magnifying glass. Quote Link to comment Share on other sites More sharing options...
madman Posted June 11, 2012 Author Share Posted June 11, 2012 Well, the shelf unit is installed. But not without some frustration. Although the units are made specifically for the Transit Connect, some slight alterations to the shelving unit, was required to get them into place. The end result will fill my needs however. I believe that I could have made my own units from wire shelving sold at Home Depot however. And for alot less cost. Quote Link to comment Share on other sites More sharing options...
HawaiianTransitTraveler Posted June 26, 2012 Share Posted June 26, 2012 aloha, Your right you can make your own shelves alot cheaper, checkout do it yourself plans at DIYconversions.com, ordered set a couple years ago, mofified mine with center rear pull outs drawers, simple build, jigsaw, and cordless drill Quote Link to comment Share on other sites More sharing options...
chrislance Posted February 21, 2013 Share Posted February 21, 2013 (edited) I also bought a set of the Adrian shelves......a real pita to install, but I think that they are going to serve the purpose. They also look one, which is important to me. Edited February 21, 2013 by chrislance Quote Link to comment Share on other sites More sharing options...
Chadjre Posted July 6, 2013 Share Posted July 6, 2013 I love my Adrian stuff! It is a itch to install and reconfigure tho. Quote Link to comment Share on other sites More sharing options...
AMSOILguy Posted September 23, 2013 Share Posted September 23, 2013 Well my problem is that there site is not very helpful on what shelve with fit where the drives slide opens. I want to be able to open the drives slide grab my products and go but its unclear what fits in that door opening. I probly going to call them to get something straight. Quote Link to comment Share on other sites More sharing options...
Raincity Posted November 24, 2013 Share Posted November 24, 2013 I like the Ranger aluminum van shelving myself. I have two full size E-250's and one Connect with this brand and it's great. Tighter to the contours of the van walls with more space in between. Lots of different layouts to choose from as well. http://www.rangervanshelving.com/ford-transit-shelving.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.