braddd Posted January 30 Share Posted January 30 I installed my new viper 3105V alarm in my 2010 transit connect. It works, but was not able to find information on which wires to connect for sensing when the side or rear door is opened. Both would need to be attached to wires that connect to ground when that door is opened to trigger the alarm. instant trigger input blue (-) connect to ground (-) when the hood or trunk are opened channel 2 output red/white (-) 200 mA chan2 output vehicle (-) trunk release or other low current device Any help would be appreciated. I attached my notes on which wires I used for anyone else to use. 2010 tc alarm viper 3105V.pdf Quote Link to comment Share on other sites More sharing options...
braddd Posted February 5 Author Share Posted February 5 Anyone? I really just need someone to check their 2010 wiring diagram for the wire color and location for two wires and I am done. instant trigger input ground (-) when the hood or trunk are opened channel 2 output vehicle (-) trunk release or other low current device Quote Link to comment Share on other sites More sharing options...
Don Ridley Posted February 6 Share Posted February 6 Here is a link to wiring diagrams for your van: Repair and Diagnosis — 2010 Ford Transit Connect L4-2.0L Service Manual | Operation CHARM Quote Link to comment Share on other sites More sharing options...
braddd Posted February 6 Author Share Posted February 6 Thank you. I had given up hope of finding them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.