Vansty Connect Posted Thursday at 07:38 PM Share Posted Thursday at 07:38 PM Hello fellow Ford transit connect owners š Ā Please advise me on this: ALL brake discs started to bind and get hot. When I pulled up to a junction - braked - went to pull forward ALL discs were brake locked for 15 seconds, when they did release still binding ??. Ā I think it's the ABS / Hill assist valve failing to release and binding ???. Ā Local garage think Master cylinder / Servo, having checked today... without ANY power on (engine not running and electrics OFF so NO servo assistance) van can be pushed freely...then as soon as brakeĀ pedal is pushed it locks all discs again for 20 seconds ??? Ā IF it were master cylinder it would be either front or rear discs locking ... NOT all... Servo pressureĀ isn't active without engine running???. Ā PLEASE help what couldĀ it be ???. Van has only 48000 miles, very well maintained and faultless until now :-(. Thanks in advance š Quote Link to comment Share on other sites More sharing options...
G B L Posted yesterday at 03:21 PM Share Posted yesterday at 03:21 PM Sounds like the first thing is a good scan with Forscan or a good scantool.Ā Pull The ABS Motor fuse and see if the lock up is stopped. Does itĀ lock up if the brakes are used with the power off? keep us up dated, Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.