Jump to content
Ford Transit Connect Forum
   

Changed 4.2" display. Lost bluetooth.


Recommended Posts

I own a 2016 Titanium. My 4.2" display died. Replaced it with one with the same model #. But now my sync with bluetooth doesn't show up as an option for connecting. My steering buttons no longer work with the radio. Is there a system config I can do with Forscan to fix this or will it have to brought to a dealer? Or is the module I bought somehow different?

Link to comment
Share on other sites

   

As far as I know the LCD display does not need programming or configuration. You may need to reset the module(s). Try disconnecting the battery (negative terminal recommend) for about 10 minutes. All modules should reset when power is reapplied. 

 

Forscan will show if there are any error codes and you can troubleshoot from there if needed.

Link to comment
Share on other sites

I assume you have Sync1. You may have a bad APIM module...maybe the LCD display was ok?  See what codes Forscan shows. The good news is a used APIM is cheap and you can configure it with Forscan. 

 

Once you've done some troubleshooting, we can figure out where the APIM is if needed. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...