dgotc Posted July 6, 2022 Share Posted July 6, 2022 At first I thought it was just dust in the roller tracks, but I think after the door slammed open on a hill the middle track is binding. It has a bit of play that binds it's movement at certain angles. Has anyone replaced these? I'm looking for tips or a procedure as well as where to get parts. I did find this part: 2069951 https://www.ebay.com/itm/255416625860 Is this correct? Does anyone have a cheaper resource for this part or a better fix? Thanks Quote Link to comment Share on other sites More sharing options...
Don Ridley Posted July 7, 2022 Share Posted July 7, 2022 See attached. sliding door.pdf Quote Link to comment Share on other sites More sharing options...
dgotc Posted July 7, 2022 Author Share Posted July 7, 2022 Don to the rescue, again! Thanks. In order to possibly avoid drilling the rivets out and having to re-rivet, I wonder if the "Sliding door hinge bolts" described in step 5 can be removed and that roller unit replaced with the door still in place. That is the failed part. Quote Link to comment Share on other sites More sharing options...
Don Ridley Posted July 7, 2022 Share Posted July 7, 2022 Yes, that looks possible. The instructions are for removing the door so you can ignore what doesn't apply to your situation. I have not done this repair. Quote Link to comment Share on other sites More sharing options...
dgotc Posted July 7, 2022 Author Share Posted July 7, 2022 Well, I guess I'll figure it out and post it here. There is no info on this repair for this model across the web. Thank you for your insight and info. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.