jeru574

I'm debating installing an Eibach prokit on my 2016. Can anyone with the kit installed comment on if the van can still be put back in factory alignment range? Thanks

Hello, I have a 2016 Titanium wagon with rear liftgate. My rear wiper has recently stopped functioning but the washer still works. Has anyone removed the rear wiper/washer motor unit and if so do I need any special tools or tricks to accomplish it? Anything else that could cause this behavior other than a bad wiper/washer motor unit? Thanks

If you're purchasing wheels originally intended for a different Ford or Volvo I'd pay close attention to the load stamped on the back. I've found a good amount do not meet the load cap of the TC.

These are the rubbertite hexmats. This style mat is offered by multiple companies but I've only found lloyds to offer the fitment.

I was told by Husky that they plan to add a 2nd row liner for bucket seats as soon as they have a vehicle to measure, they are not located in a large metro so maybe that really is the hold up. The only 2nd row bucket seat option I've found is a custom fit Lloyds rubbertite hex mat, autoanything.com has them available. I checked and the 6-Pass and 7-Pass versions have different part numbers so it seems correct. I had these in a Scion xB a few years ago and they did an okay job, they are half the price of liners.

I just picked up a used TC with a shattered fog and this post help point me in the right direction for replacing it, took about 30-45 mins to complete the passenger side. I removed the T30 screws and pop rivets for the front half of the fender liner and then the 3 pop rivets connecting the liner to lower splash guard. I used some wire to pull the liner back out of the way giving enough access to remove the T25 screws holding the fog lamp in place, luckily it stays put without any screws.