Black46

So we tried changing the IPC settings, tried an older version of Forscan, reset back to original settings then tried the changes again and no luck ? Paul

Actually, we didn't do this. We hit the check mark when we made the selection. When we started Forscan again, the changes were still there, so we assumed the changes were written to the ECM. Is that a bad assumption?

Got it. I see the module in my first snip above. We'll give it a try tomorrow. ?

Thanks Don. I don't understand what IPC is and where I find it? Paul

Yes, hit the write button and accessed ASL in engineering mode. We went back into Forscan to get the snips above and what you see is what was saved.

No change to the display.

Thanks for the reply. We tried that as well with no luck Paul

Forgot to mention, we used the OHP ELMconfig OBD2 Adapter

We need some help here. My wife is leaving on a 1400 mile trip on Friday and desperately needs CC. We have a 2016 TC XL and swapped the steering wheel for a 2016 with CC (and radio) buttons that we got from an auto recycler. We used Forescan (version 2.3.46) to enable cruise control and ASC in the Central Configuration module and not having any luck getting it working. We tried different combinations of selections within those 2 modules with no luck. Looked in different modules for other possible CC settings and didn't find anything. I took the airbag back off to double check the connections and that no wires got pinched and everything looked good. Any ideas where we can go from here? Paul