Search the Community

I added some nice LED lights to the cargo area of my SWB 2016 wagon. The lights have an OEM look and provide just enough light to illuminate the cargo area. The lights are mfg by Brand Motion http://www.brandmotion.com/oem-integration/led-lighting/loftlite-led-interior-lighting-kit.html The total lumens from the 4 lights is probably around 90-100. I tapped into the wiring for the side mounted cargo lights. The lights turn on and off with the doors. They dim as the interior lights turn off like the stock incandescent lamps. Each light has a function where separate power can be wired to the light to turn it on by pushing the center of the lamp. Unfortunately this won't work in the TC because the TC dims the lights and turns them off by raising the negative supply to the lamps from 0 volts to +12 volts. So when the lights are off both leads are at +12V. The "push-on" function won't work because when the lamps are off there is no negative supply to the lamp. This is not a problem for me because I would never be in a position to turn the lights on while I am driving. If you wanted them to be reading lights for passengers it would not work. The installation is relatively easy. You have to carefully pull down the headliner just enough to access the back side and cut 4 holes. The insulation on the headliner has to be shaved away so the bezel can snap onto the lamp (use an xacto knife and cut at a 45 deg angle from the bottom of the hole). You will also need to temporarily wedge something between the front lamp housing and the roof so you can push the bezel on. I cut a short piece of PVC pipe and stuck it on a long rod. You remove the wedge once the unit is snapped into place.