Booster Buggy

10 blown fuses later and finally found the part of harness that rubbed through, one of the holders on the harness coming from the ecm snapped off and it started rubbing on the tranny mount bolt. All fixed now and wanted to say thanks for all the input.

they checked all the connections and played with the ecm harness now all the light are off, no codes and running fine. I'm being told just a bad connection or a wire in the harness on the way out... but now to drive it until it happens again.

seems to be a short in the wiring harness/corroded plug Im told now, let you know when I get it back from the shop.

just waiting until Monday to get it in for codes, When it is running and I uncheck the traction control in the information center it automatically puts the check mark back but if I do it while it's not running the other light comes on with the word off under it but as soon as I start it automatically goes back to the light(car with skid marks) with no off under it and stays on solid

2014 Transit connect 2.5 cyl...TC was running fine shut it off ran in for a coffee come out and as soon as i started it the information center chimed with 2 messages. Engine fault service engine soon, Hill assist not available as well as engine light came on and the stability light(car with skid marks). Now it will ide fine but as soon as you try to accelerate it has no power and spudders. any suggestions?