Jump to content
Ford Transit Connect Forum
   

mgroeger

T.C. Member
  • Posts

    4
  • Joined

  • Last visited

Everything posted by mgroeger

  1. Me Dummy or Dealership Dummy? That was a pretty dumb answer from the dealer.
  2. Thanks Don. The method I showed is simple and I've done it before with great success on another car. I've also used your method and it works well too. It will get about 80% to 90% changed over with the drain and fill version which is probably a good thing to leave a little behind to act almost as a friction modifier. The dealer wants $250 so I'll do this on my own. Do you know how many quarts the trans holds? Personally I will stick with the Ford brand that is in it, I've learned my lesson the hard way on that but that's a whole other conversation
  3. I have a 2010 Ford Transit Connect XLT that came with a flower shop we bought last December. It has an automatic transmission, 2.0 gasoline engine and 112,000 miles on the car. The transmission fluid has never been changed. I called the dealer where it was purchased and he looked it up by VIN number and said I have the 150k miles transmission fluid in my model. I know a good deal about cars and personally I change my trans fluid every 60k miles, so I know it's a crap shoot to change this fluid at this mileage. The fluid is still red, not gritty and smells fine. Any advice on changing this fluid? I would do it myself with Ford fluid by taking off the trans line and letting the transmission pump out old fluid and then add new fluid in. That way there is no pressure on the system... i.e. not doing a power flush.
  4. I have a 2010 Transit Connect XLT, 2.0 gasoline engine with 112,000 miles on it. We got this van when we purchased our flower shop back in 12/17. The van came with the shop. It has been "maintained", meaning oil changes and brakes, maybe plugs... the basics. The other day the spark plug blew out of the cylinder head. I have no idea if these were orig plugs (I don't think so) so I don't know if maybe the plug was over tightened or if it pulled a Ford and did what the plugs in the V8 engines due quite often... blow out of the cylinder. Needless to say I'm a bit soured on Ford right now. Being a shade tree mechanic I knew I had a chance at re-cutting the threads and putting an insert in it. I'll spare the details but it didn't work. I took it to my mechanic and he is pulling the head off and taking it to a machine shop. They will see if they can repair or if we need to get a re-manufactured head. Has anyone else had this issue? Also are there other engine things I should be aware of? We replaced the idler pulley and belt and will be replacing the water pump too. We will also be putting Ford spark plugs in it and the coil over the blown plug needed to be replaced. I've heard the transmissions in these are not the greatest as well.
×
×
  • Create New...