Jump to content
Ford Transit Connect Forum
   

ang210

T.C. Member
  • Posts

    4
  • Joined

  • Last visited

Everything posted by ang210

  1. Verified no harness is needed. All the wiring is in place. Will have the BCM bits modified this week using bits I found from other vans that have cruise control. Will post my results after I accomplish this. I believe a BCM modification and an IPC modification will be required.
  2. I had the new cluster programmed and cruise still does not work. After looking at two similar vans one with Cruise the other without the harness part numbers are different. It looks like a new wiring harness may be needed from steering column to BCM. I will update as soon as I know. Have been using IDS. A local guy has the software and is willing to attempt. Harness is expensive. Trying to locate one from a wreck and if not then will try to run the missing wires. Crossing my fingers this works. Anyone else have any suggestions? For the record I had the cluster programmed so the mileage read the same as mine.
  3. Update I discovered I needed a different cluster. I purchased a used cluster with lower mileage than the original. I installed the new cluster to test it and everything still works. In addition the information controls now work. The cruise control still cannot be turned on. I think the PCM may need to be programmed to the new cluster. Does anyone know if that is the case? Existing Cluster DT1T-10849-PD Replacement cluster DT1T-10849-SCC I cannot find different part numbers for the clock-spring or Steering Angle Sensor Module. I believe they are the same in all models.
  4. I a have already replaced the steering wheel with one that had the controls. The controls are illuminated now. What else is necessary to activate the cruise control?
×
×
  • Create New...