Jump to content
Ford Transit Connect Forum
   

Bill

T.C. Member
  • Posts

    12
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Bill

  1. Bill

    Hello

    Thanks, CapnTroy- My wife made those for the back and side windows. We stole the idea from someone who made them for a Sprinter-based RV and posted a how-to on the internet.Took awhile, but materials were cheap and they work really well, keeping warm in when it's cold outside and keeping the inside cooler when it's hot and sunny outside. TC Wagons with all that window glass are like greenhouses in the summer sun. Gotta have shades. I'll post up some more pics and info on those in the "mods" section if you or anybody else is interested.
  2. Bill

    Hello

    Thanks, Windguy The extension is actually where our feet/legs go. It's the shorter section and narrower, so it is plenty rigid and you can get your legs down on the side, step on the sliding door sill, pull the inside door handle, and you're out. It also means my wife and I don't have to climb over each other to get in and out. Good 3/4" hardwood ply and climbing rope on each corner holds a person's weight just fine (I'm 180 lbs and my wife's a lot lighter). I skipped the leg option on the extension because I found I didn't need to add the complication, especially with the milk crate in the center. The ropes also allow you to lift up the bottom part of the bed part-way and keep it there by hanging the loops on the bolted in hooks just above the sliding doors. Then you have easy, hands-free access to anything underneath. I can also fold the whole thing back up and reinstall the rear bench seat to make the TC a functional wagon. The bed and back seats can coexist, although I took them out for more storage space while camping. Next up is pulling the headliner and insulating the ceiling as well as contemplating a roof vent. I'll start a new topic/thread in the "modifications" section if you or anybody else is interested in more details/pictures.
  3. Bill

    Hello

    Just wanted to say hello and thanks to all who've posted here the last few years. I've learned quite a bit from this forum. Some pics of my TC (2013 Wagon) and the convertible bed I built for it from our first camping trip- http://fordtransitconnectforum.com/gallery/album/130-2013-tc-wagon-camper/
  4. From the album: 2013 TC Wagon Camper

    Seats in driving position. Slide them forward and tilt toward dash for enough room to hang legs off the bed and put your shoes on, etc.
  5. From the album: 2013 TC Wagon Camper

    Window shade w/reflectix facing the outside.
  6. From the album: 2013 TC Wagon Camper

    Window shade w/ quilting on the inside held in place by magnet in each corner.
  7. From the album: 2013 TC Wagon Camper

    Corner support rope connects to rope/carabiner hanging from seat belt upper.
  8. From the album: 2013 TC Wagon Camper

    Not really necessary, but I slapped some scrap wood together for an extra flat support in the middle of extension. Belt and suspenders.
  9. From the album: 2013 TC Wagon Camper

    Plenty of underneath storage accessible from front and rear.
  10. From the album: 2013 TC Wagon Camper

    3/4 hardwood ply bed platform (supported by and bolted to 2"x2' frame) that's 51"x40" attached to 45"x32" extension. When folded up like this, I can install rear bench seats without removing this platform.
×
×
  • Create New...