Nate5

I did not. I did probe the connector pins and the resistances were all good according to a document my mechanic buddy sent to me.

I believe my ODB2 has that function but not sure what I’d be looking for. I can try and get the data and upload it here.

No codes. Only the EGR sensor is not ready. Every other sensor is good

No codes. Only the EGR sensor is not ready. Every other sensor is good

Hey guys. New here so not sure if this is posted in the right spot. I have a 2011 transit connect that won’t pass smog due to EGR sensor not being ready and it’s giving me a huge headache. I’m in California so emissions is a hassle. In September I had a small EVAP leak code, I replaced the purge valve but the code came back. I then took it to a shop and they found the vapor canister was staying open by a smoke test. So they replaced it and the code went away. But since then my EGR sensor will not clear. No other codes or systems not ready. I have done all the drive cycles a dozen times. I drove over 800 miles trying to get it to be ready. I took it back to the shop and they double checked that the systems were functioning properly. Shop told me to drive it more ? I went ahead and replaced the EGR valve myself and reset the ecu by disconnecting the battery for 20 minutes. I have since drove over 1200 miles and the EGR sensor is still not ready. I’m pulling my hair out. Do you guys know of anything else I can try? thanks