Leaderboard

We used Frost King 1/8" thick duct insulation on the floor and ceiling. Above that we used 2 layers of 1/2" thick closed cell foam board insulation on the floor. The plywood in this shot is just weighing everything down while the glue sets up and dries. As you can also see, we built everything up so that we can still get under the floor extension, if necessary. The next phase was putting down the plywood floor. This was pretty simple, just cut a 4x8' sheet of plywood down to 4x7' or whatever the length of the cargo area is. That gives us the flexibility to screw everything down to that and not put holes in the sheet metal. We took Torton's basic cabinet design and modified it a bit. We have batteries and an electric cooler that we need to accommodate so our front cabinet is a bit bigger. We are still planning to utilize the drawer concept that he came up with, but we aren't finished with that just yet. This is where the cooler will live. It will slide in and out on a 2' long 500lbs capacity set of drawer glides.