ActiveIndy Posted March 9, 2015 Share Posted March 9, 2015 Hey gang! 2010 XLT owner here. Had one of my front turn signals go out late last year, replaced the bulb and all was well. A couple months later the other one goes out - change the bulb and no dice. Took the entire bulb/socket from the working signal and dropped it into the non-working assembly and it works fine. Took the "malfunctioning" bulb/socket and dropped it into the working assembly and it doesn't work. So it appears that the socket that the bulb plugs into - and you then screw that into the assembly - has gone bad. Anything I should look at with the socket itself that might be "fixable" before I scrap it and just order a new one? It appears it is part number 13k370 and runs about $18 or so.... Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.