Jump to content
Ford Transit Connect Forum
   

Rpdsoundandlight

T.C. Member
  • Posts

    1
  • Joined

  • Last visited

About Rpdsoundandlight

Profile Information

  • Region
    European Union
  • My. T.C.'s Year
    None
  1. I have a 2010 European ( I am in the uk) transit connect and the fold flat single passenger seat would not fold down, the seat base would not pull up and the seat back would not click into its upright position. I looked everywhere I could think of on the net for some images on how the seat mechanism works which proved fruitless so here’s some photos I took myself after I had fixed it. How did I fix it? I sprayed the mechanism with GT85 (wd40 would have done just as well I just prefer the smell of GT85!) and let that soak in overnight. I then noticed that the seat base was stuck down because the two pins that are welded to the underside of the seat base were trapped in the seat mechanism grooves. Where the two grooves should line up they were not. A simple bit of tweaking with a long screwdriver released the pin (it’s the same at the ‘handbrake ‘ side for the seat because the bar that runs across the seat base with the small spring on it basically causes the handbrake side of the mechanism to mirror what the side you are working on is doing.) This released the mechanism and now its all good. I am going to upload a short video to you tube showing the mechanism working as it should too.
×
×
  • Create New...