BHILLC

The car mat was easy to remove. The side wall trim covers and both side door kick trim needs to be removed. Also the rear door floor trim. They are only held in by clips so carefully remove not to break the clip or panel. I will get more pictures when I remove again to install my seat. Also the 2nd row deck plate appears to be only bolted, my carpet from the front continues into this area. Again I will get pictures of all when I install my rear seat.

No bolt holes, but there is plenty of room under the van to bolt in. If the frieght is too expensive my wife works for a frieight forwarder I may beable to get it cheaper.

The plate at the front is bolted in and all the mounting points are there for the seats. I am pretty I can mount the rear seats with a through bolt.

Don, No bolt holes. I am thinking I can install nut serts to mount the brackets. What do you think?

Are your seats still available? I am looking to add seat to my 2015 connect

Also do you have the seat belts, and mounting hardware? I just purchased a 2015 cargo LWB. I am pulling the rubber mat tomorrow, I am being told the bolt holes should be there. If so I am definitely interested.

Ok thanks I am pulling the mat tomorrow hopefully if I get time after work.

Are the seat bolt holes present even with the floor insert that Ford puts in the connect cargo?

I may be looking for some seats. Just bought a new transit connect cargo and need to add one or two seats to rear.

We got the long wheel base cargo. We use it for work and didn't want or need all the seats and windows

Is the load floor extension tac welded in place or bolted. I would love to remove it and add a seat or two.

Just bought a 2015 Connect for our business. We usually travel with 3 of us. Is it possible to add a seat or seats in the rear area. I know the floor spacer is tac welded in place. I have been looking for a seat to bolt in just wondering if anyone has done it. Pictures would be great with some insight on where to start. Thanks