braddd

Thank you. I had given up hope of finding them.

Anyone? I really just need someone to check their 2010 wiring diagram for the wire color and location for two wires and I am done. instant trigger input ground (-) when the hood or trunk are opened channel 2 output vehicle (-) trunk release or other low current device

This is a huge help! $40 and 4 hours later, I finally have all my doors locking when I push the lock button. I had been walking around the car and checking each one and locking the ones that failed to lock manually every time. I thought I was going to have to bite the bullet and purchase entire locking mechanisms for every door.

I installed my new viper 3105V alarm in my 2010 transit connect. It works, but was not able to find information on which wires to connect for sensing when the side or rear door is opened. Both would need to be attached to wires that connect to ground when that door is opened to trigger the alarm. instant trigger input blue (-) connect to ground (-) when the hood or trunk are opened channel 2 output red/white (-) 200 mA chan2 output vehicle (-) trunk release or other low current device Any help would be appreciated. I attached my notes on which wires I used for anyone else to use. 2010 tc alarm viper 3105V.pdf

If you bypass the door it will no longer trigger your alarm if opened. Assuming you have an alarm...