2015 connect 2.5l 6f35 trans
I ripped the tss Turbine speed sensor connector off during trans removal I have a new connector but all the wires are the same color greening all 3
I have No way to tell what wires went were
On the new connector I am considering the lock as the toofif you were looking at the pins in the connector directly
[ ]lock
( O. O. O. )
1. 2. 3.
I have 3 wires on the original harness
Brown- blue 0vdc 120ohms to ground
White-orange 5vdc
Green-violet 12.45vdc
I need to know what color goes to what pin number as shown above
Any help or even a picture of the schematic
I also keep blowing fuse 33 in the fuse box under the hood on rightside right of battery box
And I keep getting 6 codes when this happens
P0420 bank 1 below threshold
P0403 exhuast gas recerc cntrl circuit
P0443 evap emmsns sys purge valve circ
P0103 mass air high input
P0135 bank 1 sens 1
P0010 intake can sens open bank 1
I assume these are all due to the fuse 33 blowing after I unhook the Turbine speed sensor the fuse stops blowing when I replace the fuse with out the tss plugged in it stays good and those errors no longer come on as soon as you turn the van on.
I really think it's all because of this sensor and now that I have tested each wire I have found that 1 is ground 1 is 5v 1 is 12v so at this point I have no idea if I have hooked the 12v to the 5v or the ground at this point and I am wondering if that hasn't destroyed the tss by hooking it up improperly
I have been to the deal for the wiring diagram and repair manuals for this thing and they tell me it's not availble at all and cannot find anything online I paid 100 for a repair program but it only has mechanical side nothing on electrical or diagrams at all so if anyone has a picture of there transit I'll i really need is to match color to pin I am going to get a new tss Turbine speed sensor
And hopefully I can get some help in knowing which wire is to what pin # thanks for the help
