Transmission fluid change
2010 transit connect , unhook the lower hose on the trans cooler and attach a lenght of hose to it. place hose into a container.Start the engine and let idell and pump out 3 qts of fluid shut off engine. Measure it in the catch container.. then add 3 new qts to the trans. Then repeat this proccedure( pump out 3 and add 3) Then pump out 3...reattach the lower transmission fluid line to the cooler and add 3 more to the trans. use Mercon LV fluid.
Here is the post I did on the Transmission Change.
The hardest part of this operation will be getting the TC Jacked up. Should be almost level . Remove the Under body dust shield . Look for the Drain Plug. 11 mm or 7/16 wrench.
]
This style funnel will slide down into the Vent plug you just removed Put 3 quarts of fluid in
[attacjpg] ]
Run the TC for 5 to 10 minutes . Then drain the fluid again. Repeat this 2 more times You have Now used 9 quarts of fluid.
Put t
