How to connect power for amps. inverters and other high current loads
Adding an audio amplifier, power inverter or other high current loads requires connecting heavy gauge cable directly to the battery. The Gen 2 TC’s battery is tucked under the front cowling and is enclosed in a covered box so making this connection difficult. Plus, having a big cable bolted to the battery with a big in-line fuse looks amateurish.
There is a professional, safe and easy alternative. The front wall of the battery box holds the high current battery junction box (BJB). This is w
Routing #4 cable to the back in your wagon will take 3-4 hours but it is not too difficult.
1 remove the rear side panel. Start at the jack storage opening. Take your time on each clip.The "pillars" on top snap onto the main panel.... Carefully disconnect these. This process takes patience and some strong fingers.
2 Remove the bottom threshold on the side door.
3 Fish/pull the cable through the rear passenger foot well under the carpet.
You could run the cable in flex, plasti
