Jump to content
Ford Transit Connect Forum
   

Terrible Sound of the XLT sound system


Recommended Posts

I bought my TC Cargo XLTyesterday (June 23, 2010) and I love it except for ONE THING. The AWFUL SOUND of the system. I am putting in a steel bulkhead behind the seats within the next 2 weeks. I have consulted a local audio place and they told me this: I need at least a 2 channel amp, larger door speakers, and a couple of tweeters. All I want is a nice sounding system with a full range of highs, mids, and lows that I can crank up. I'm not looking for a LOUD booming sound that will tick off everyone around me. I hate distortion. If anyone has advice, I will greatly appreciate it. This is the worst sounding factory system that I have ever heard.

Link to comment
Share on other sites

   

I bought my TC Cargo XLTyesterday (June 23, 2010) and I love it except for ONE THING. The AWFUL SOUND of the system. I am putting in a steel bulkhead behind the seats within the next 2 weeks. I have consulted a local audio place and they told me this: I need at least a 2 channel amp, larger door speakers, and a couple of tweeters. All I want is a nice sounding system with a full range of highs, mids, and lows that I can crank up. I'm not looking for a LOUD booming sound that will tick off everyone around me. I hate distortion. If anyone has advice, I will greatly appreciate it. This is the worst sounding factory system that I have ever heard.

Check the thread "Audio Options" as there are a few of us who have remedied this exact situation. Tin cans and kite string.....GONE.

The problem IS the speakers. They are the lousiest things I've seen. (There is a photo of them in the thread). Couple that to a little lack of power to them and you're off to see the wizard for something better. Door speakers don't have to be bigger, just need to be

better, and have a little kick. While the panels are off, stuff the backside of them with some insulation - it helps after the speakers are replaced.

An amp is a good thing too.

Roland C.

Happliy Transiting :shift:

Link to comment
Share on other sites

Check the thread "Audio Options" as there are a few of us who have remedied this exact situation. Tin cans and kite string.....GONE.

The problem IS the speakers. They are the lousiest things I've seen. (There is a photo of them in the thread). Couple that to a little lack of power to them and you're off to see the wizard for something better. Door speakers don't have to be bigger, just need to be

better, and have a little kick. While the panels are off, stuff the backside of them with some insulation - it helps after the speakers are replaced.

An amp is a good thing too.

Roland C.

Happliy Transiting :shift:

Link to comment
Share on other sites

Thanks for the info. I will read that thread totally. I see that many people have replaced the door speakears w/Alpine 5 1/4 SPS 500 and SPR 13C. I am putting in a steel bulkhead, so aside from replacing the door speakers, would you suggest an amp and a sub? Or maybe a powered sub and let the factory stereo power the door speakers? I just want a clear sound that I can crank up w/no distortion. Thanks again for the info.

Shannon

Link to comment
Share on other sites

Thanks for the info. I will read that thread totally. I see that many people have replaced the door speakears w/Alpine 5 1/4 SPS 500 and SPR 13C. I am putting in a steel bulkhead, so aside from replacing the door speakers, would you suggest an amp and a sub? Or maybe a powered sub and let the factory stereo power the door speakers? I just want a clear sound that I can crank up w/no distortion. Thanks again for the info.

Shannon

I don't have a bulkhead, but.... I went with the SPR13C in the front doors, as well as a second pair in the back doors facing forward. They are powered by an 300 watt Alpine four channel amp, and there is also a 10" Infinity Basslink powered subwoofer. I was looking for the same thing you mention - clean sound throughout the spectrum. It works great. With the bulkhead, I don't know where you'd put the sub, but the radio is ill-powered to handle competing with a powered sub without using some type of amp on the other speakers - in my opinion.

I am SURE that replacing the speakers alone will make a huge difference. I posted a photo of the removed factory speakers - which will explain a lot in regard to the crapola sound.

There are loads of options to consider, so go and listen and look before making a long term commitment. Remember - you will be living with it for a while!

What I didn't mention is that I bought a pass through harness to use a direct hook-up of my XM receiver, and all the splicing was done in the pass through harness in order to leave the other stuff as was. I can pull the radio, remove the harness and associated wires, XM receiver and speakers and move them to my next vehicle (probably another T/C) when it's time.

REC

Roland C.

Happily Transiting :shift:

Link to comment
Share on other sites

I don't have a bulkhead, but.... I went with the SPR13C in the front doors, as well as a second pair in the back doors facing forward. They are powered by an 300 watt Alpine four channel amp, and there is also a 10" Infinity Basslink powered subwoofer. I was looking for the same thing you mention - clean sound throughout the spectrum. It works great. With the bulkhead, I don't know where you'd put the sub, but the radio is ill-powered to handle competing with a powered sub without using some type of amp on the other speakers - in my opinion.

I am SURE that replacing the speakers alone will make a huge difference. I posted a photo of the removed factory speakers - which will explain a lot in regard to the crapola sound.

There are loads of options to consider, so go and listen and look before making a long term commitment. Remember - you will be living with it for a while!

What I didn't mention is that I bought a pass through harness to use a direct hook-up of my XM receiver, and all the splicing was done in the pass through harness in order to leave the other stuff as was. I can pull the radio, remove the harness and associated wires, XM receiver and speakers and move them to my next vehicle (probably another T/C) when it's time.

REC

Roland C.

Happily Transiting :shift:

Roland,

Thank you so much. I will be taking your advice and getting the Alpine SPR13Cs and an amp and sub. A friend of mine has suggested a similar set-up, but with your advice I feel like I really have the facts now. I can't wait to get them installed.

Shannon

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...